802.1ah I-TAG interface object.
Side name
(Type) |
Relative |
Description |
GroupIf
(AffiliatedGroupIf) |
GroupIf
|
Affiliated group interface.
|
DstBoundTo
(DstBinding) |
PathDescriptor, StreamBlock, TrafficDescriptor
|
Specifies destination endpoints bound to StreamBlock.
|
EncapsulationSource
(Encapsulation) |
PathDescriptor
|
Specifies the encapsulation.
|
NetworkLink
(LinkSrc) |
CustomLink, CustomLink, DualStackLiteLink, DualStackLiteLink, EoamLink, EoamLink, EthernetBridgeLink, EthernetBridgeLink, EvpnCeToPeLink, EvpnCeToPeLink, IpForwardingLink, IpForwardingLink, Ipv6RapidDeploymentLink, Ipv6RapidDeploymentLink, ItagServiceLink, ItagServiceLink, L2GreTunnelLink, L2GreTunnelLink, L2tpv3ForwardingLink, L2tpv3ForwardingLink, MplsForwardingLink, MplsForwardingLink, MplsHierarchicalLink, MplsHierarchicalLink, MplsIpv4VpnCeToPeLink, MplsIpv4VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsL2VpnPeToPLink, MplsL2VpnPeToPLink, MplsL3VpnPeToPLink, MplsL3VpnPeToPLink, MVpnGreCeToPeLink, MVpnGreCeToPeLink, MVpnGrePeToPLink, MVpnGrePeToPLink, OtvEdgeDeviceLink, OtvEdgeDeviceLink, StationToScompLink, StationToScompLink, VifToVicLink, VifToVicLink, VlanSwitchLink, VlanSwitchLink, VplsBgpCeToPeLink, VplsBgpCeToPeLink, VplsLdpCeToPeLink, VplsLdpCeToPeLink, VsiToStationLink, VsiToStationLink, VxlanGpeLink, VxlanGpeLink, VxlanVmToVtepLink, VxlanVmToVtepLink
|
Link source.
|
MemberOfVpn
(MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
MulticastExpectedRxPorts
(MulticastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
OptionallyStackedUnder
(OptionallyStackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies an optionally-selected lower interface in the stack. Selection is
controlled by protocol implementations which decide based on other criteria whether they
should include the target interface in their stack.
|
OtvEdgeDeviceConfig
(OtvTopLevelIf) |
OtvEdgeDeviceConfig
|
Otv top level private interface.
|
PrimaryIfSource
(PrimaryIf) |
EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT
|
Specifies if a top-level interface is facing the DUT.
|
RelayBlockConfig
(RelayIf) |
Dhcpv4BlockConfig, Dhcpv4BlockConfig
|
Config to relay agent interface.
|
(ResolvesInterface) |
BgpRouterConfig, IsisRouterConfig, LdpRouterConfig, LispRouterConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, RsvpIngressTunnelParams, RsvpRouterConfig
|
Use this to link the traffic binding interfaces and traffic binding
resolver.
|
SrcBoundTo
(SrcBinding) |
PathDescriptor, StreamBlock, TrafficDescriptor
|
Specifies the source endpoint bound to StreamBlock.
|
StackedOn
(StackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies network endpoint stacking.
|
TopLevelIfSource
(TopLevelIf) |
EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT
|
Specifies the top-level interface in the interface stack.
|
L2tpv2UdpConfig
(UdpSrcCustomIf) |
L2tpv2BlockConfig
|
Config to Udp source custom interface.
|
UnicastExpectedRxPorts
(UnicastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
UsesIfSource
(UsesIf) |
AncpAccessNodeConfig, AppPerfClientConfig, AppPerfServerConfig, AutosarTimeSyncConfig, BfdRouterConfig, BridgePortConfig, CifsClientProtocolConfig, CifsServerProtocolConfig, CoapServerConfig, CuspProtocolConfig, Dhcpv4BlockConfig, Dhcpv4ServerConfig, Dhcpv6BlockConfig, Dhcpv6PdBlockConfig, Dhcpv6ServerConfig, Dot1xSupplicantBlockConfig, DpgClientProtocolConfig, DpgServerProtocolConfig, DualStackLiteConfig, EcpriProtocolConfig, EoamNodeConfig, FcEPortConfig, FcFPortConfig, FcHostConfig, FcoeHostConfig, FcoeVePortConfig, FcoeVfPortConfig, FtpClientProtocolConfig, FtpServerProtocolConfig, HttpClientProtocolConfig, HttpServerProtocolConfig, Ieee1588v2ClockConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, Ieee8021asClockConfig, IgmpHostConfig, IgmpRouterConfig, IperfClientProtocolConfig, IperfServerProtocolConfig, Ipv6RapidDeploymentConfig, L2tpv2BlockConfig, L2tpv3BlockConfig, LacpPortConfig, LagBfdPortConfig, LinkOamRouterConfig, LispRouterConfig, LldpNodeConfig, LspPingProtocolConfig, MacsecSupplicantBlockConfig, MldHostConfig, MldRouterConfig, MplsTpConfig, MplsTpOamNodeConfig, MsdpProtocolConfig, NetconfClientConfig, NetconfProtocolConfig, NtpClientConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, PacketChannel, PcepProtocolConfig, PimRouterConfig, PppoaClientBlockConfig, PppoaServerBlockConfig, PppoeClientBlockConfig, PppoeServerBlockConfig, PppoL2tpv2ClientBlockConfig, PppoL2tpv2ServerBlockConfig, PppoL2tpv3ClientBlockConfig, PppoL2tpv3ServerBlockConfig, PppProtocolConfig, RawTcpClientProtocolConfig, RawTcpServerProtocolConfig, RipRouterConfig, RoEBlockConfig, SaaDeviceConfig, SipUaProtocolConfig, SrpConfig, Srv6OamProtocolConfig, StorageWorkerConfig, SyncEthDeviceConfig, TrillRbridgeConfig, TwampClientConfig, TwampServerConfig, VdpStationConfig, VicAdapterConfig, VideoClientProtocolConfig, VideoServerProtocolConfig, VifConfig, VsiBlockConfig, VxlanVtepConfig, XmppvJClientConfig
|
Specifies the interfaces used by the configuration object (configuration object
examples: BgpRouterConfig, LdpRouterConfig, and so on).
|
| Attribute |
Description |
|
Common Writable Attributes
|
Active, Name
|
|
BackboneDstMac
|
MAC address of the service destination.
Type: mac
Default: 00:00:01:00:00:01
|
|
DropEligible
|
Select to configure the service as drop eligible for congestion
control.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
Service is drop eligible for congestion control.
|
| FALSE |
Service is NOT drop eligible for congestion control.
|
|
|
IfCountPerLowerIf
|
Number of interfaces in this interface object.
Type: u32
Default: 1
|
|
IfRecycleCount
|
How many times to increment the ISID before returning to the starting
value. See Isid for more information.
Type: u32
Default: 0
|
|
Isid
|
Service ID. You can generate more than one ISID by using IsidRepeatCount,
IsidStep, and IfRecycleCount. If you do that, then the value of this attribute is
the starting ISID.
Type: u32
Default: 0
Range: 0 - 16777216
|
|
IsidList
|
A Tcl list of ISIDs. To use this attribute, the IsRange attribute must be
FALSE.
Type: u32
Default: 0
|
|
IsidRepeatCount
|
How many times to repeat the same ISID before incrementing it. See Isid for
more information.
Type: u32
Default: 0
|
|
IsidStep
|
ISID step value. See Isid for more information.
Type: s32
Default: 1
|
|
IsLoopbackIf
|
Whether this is a loopback interface.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
This is a loopback interface.
|
| FALSE |
This is not a loopback interface.
|
|
|
IsRange
|
Whether to use a combination of attributes to generate a range of ISIDs, or
to use the IsidList attribute to specify the ISIDs.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
Use a combination of attributes to generate a range of ISIDs. The
attributes are Isid, IsidStep, IsidRepeatCount, and IfRecycleCount. See Isid
for more information.
|
| FALSE |
Use the IsidList attribute to specify the ISIDs.
|
|
|
PbbBackboneDstMacPrefixLength
|
Pbb backbone destination mac address prefix length.
Type: u8
Default: 48
|
|
PbbBackboneDstMacStep
|
Pbb backbone destination mac address step.
Type: mac
Default: 00:00:00:00:00:01
|
|
Priority
|
Priority of the service.
Type: u8
Default: 7
Range: 0 - 7
|
|
ReservedBits1
|
Value of reserved bits.
Type: u8
Default: 0
|
|
ReservedBits2
|
Value of reserved bits.
Type: u8
Default: 0
|
|
UseCustomerAddresses
|
Select to indicate that the source and destination addresses in the I-Tag
are valid customer addresses.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
Source and destination addresses in the I-Tag
are valid customer addresses.
|
| FALSE |
Source and destination addresses in the I-Tag
are NOT valid customer addresses.
|
|