Description:
Defines the characteristics of MPLS TP static LSP binding information.
Parents: Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf
Children: MplsTpLspFaultOamConfig, MplsTpStaticLspBfdConfig
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
MplsTpConfig (MplsTpFaultOamAssociation) |
|
|
StaticLabel (MplsTpOamStaticLblAssociation) |
|
|
ProtectionDomain (MplsTpProtectionDomainToWorkingLspRelationType) |
MplsTpLinearProtectionDomainConfig, MplsTpLinearProtectionDomainConfig |
|
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||
DstGlobalId |
Destination Global ID. Type: string Default: 1 |
||||||
DstMac |
Destination MAC address. Type: mac Default: 00:00:94:00:00:01 |
||||||
DstNodeId |
Destination node ID. Type: string Default: 192.85.2.1 |
||||||
DstNodeIdStep |
Destination node ID step. Type: string Default: 0.0.0.1 |
||||||
DstTunnelNum |
Destination tunnel number. Type: u16 Default: 1 |
||||||
DstTunnelNumStep |
Destination tunnel step. Type: u16 Default: 1 |
||||||
EnableBfd |
Enable BFD. Type: bool Default: FALSE Possible Values:
|
||||||
EnableFaultOam |
Enable fault OAM. Type: bool Default: FALSE Possible Values:
|
||||||
IncomingLabel |
Incoming label. Type: u32 Default: 16 |
||||||
IncomingLabelStep |
Incoming label step. Type: u32 Default: 1 |
||||||
LspCount |
LSP Count. Type: u16 Default: 1 |
||||||
LspId |
LSP ID. Type: u16 Default: 1 |
||||||
LspIdStep |
LSP ID step. Type: u16 Default: 1 |
||||||
OutgoingLabel |
Outgoing label. Type: u32 Default: 16 |
||||||
OutgoingLabelStep |
Outgoing label step. Type: u32 Default: 1 |
||||||
SrcGlobalId |
Source Global ID. Type: string Default: 1 |
||||||
SrcNodeId |
Source node ID. Type: string Default: 192.85.1.1 |
||||||
SrcNodeIdStep |
Source node ID step. Type: string Default: 0.0.0.1 |
||||||
SrcTunnelNum |
Source tunnel number. Type: u16 Default: 1 |
||||||
SrcTunnelNumStep |
Source tunnel step. Type: u16 Default: 1 |
There are no read-only attributes.