L2tpv3If Object

Description:

L2TP v3 Interface

Writable Attributes
Read-Only Attributes

Parents: EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT

Children: GroupIf, MplsGeneralizedPwBindInfo, MplsIpv4MultiLayerStaticBindInfo, MplsIpv4PrefixBindInfo, MplsIpv4VpnBindInfo, MplsIpv6MultiLayerStaticBindInfo, MplsIpv6PrefixBindInfo, MplsIpv6VpnBindInfo, MplsRsvpTunnelBindInfo, MplsRsvpTunnelSrcDstBindInfo, MplsSrBindInfo, MplsTpStaticLspBindInfo, MplsTpStaticPseudoWireBindInfo, MplsVcBindInfo, MplsVplsBindInfo, Rfc4814EthIIIfDecorator

Relations:

Side name (Type)	Relative	Description
GroupIf (AffiliatedGroupIf)	GroupIf	Affiliated Group Interface.
DstBoundTo (DstBinding)	PathDescriptor, StreamBlock, TrafficDescriptor	Specifies destination endpoints bound to StreamBlock.
EncapsulationSource (Encapsulation)	PathDescriptor	Specifies the encapsulation.
NetworkLink (LinkSrc)	CustomLink, CustomLink, DualStackLiteLink, DualStackLiteLink, EoamLink, EoamLink, EthernetBridgeLink, EthernetBridgeLink, EvpnCeToPeLink, EvpnCeToPeLink, IpForwardingLink, IpForwardingLink, Ipv6RapidDeploymentLink, Ipv6RapidDeploymentLink, ItagServiceLink, ItagServiceLink, L2GreTunnelLink, L2GreTunnelLink, L2tpv3ForwardingLink, L2tpv3ForwardingLink, MplsForwardingLink, MplsForwardingLink, MplsHierarchicalLink, MplsHierarchicalLink, MplsIpv4VpnCeToPeLink, MplsIpv4VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsIpv6VpnCeToPeLink, MplsL2VpnPeToPLink, MplsL2VpnPeToPLink, MplsL3VpnPeToPLink, MplsL3VpnPeToPLink, MVpnGreCeToPeLink, MVpnGreCeToPeLink, MVpnGrePeToPLink, MVpnGrePeToPLink, OtvEdgeDeviceLink, OtvEdgeDeviceLink, StationToScompLink, StationToScompLink, VifToVicLink, VifToVicLink, VlanSwitchLink, VlanSwitchLink, VplsBgpCeToPeLink, VplsBgpCeToPeLink, VplsLdpCeToPeLink, VplsLdpCeToPeLink, VsiToStationLink, VsiToStationLink, VxlanGpeLink, VxlanGpeLink, VxlanVmToVtepLink, VxlanVmToVtepLink	Link source.
MemberOfVpn (MemberOfVpn)	EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp	Do not use, to be removed
MulticastExpectedRxPorts (MulticastExpectedRxPorts)	Port	Traffic sent to this end point is expected to be received as multicast traffic by any of the ports connected through this relation.
OptionallyStackedUnder (OptionallyStackedOnEndpoint)	Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf	Specifies an optionally-selected lower interface in the stack. Selection is controlled by protocol implementations which decide based on other criteria whether they should include the target interface in their stack.
OtvEdgeDeviceConfig (OtvTopLevelIf)	OtvEdgeDeviceConfig	Otv top level private interface.
PrimaryIfSource (PrimaryIf)	EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT	Specifies if a top-level interface is facing the DUT.
RelayBlockConfig (RelayIf)	Dhcpv4BlockConfig, Dhcpv4BlockConfig	Config to relay agent interface.
(ResolvesInterface)	BgpRouterConfig, IsisRouterConfig, LdpRouterConfig, LispRouterConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, RsvpIngressTunnelParams, RsvpRouterConfig	Use this to link the traffic binding interfaces and traffic binding resolver.
SrcBoundTo (SrcBinding)	PathDescriptor, StreamBlock, TrafficDescriptor	Specifies the source endpoint bound to StreamBlock.
StackedOn (StackedOnEndpoint)	Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf	Specifies network endpoint stacking.
TopLevelIfSource (TopLevelIf)	EmulatedDevice, ExternalDevice, ExternalDevicePort, Host, Port, Router, SUT	Specifies the top-level interface in the interface stack.
L2tpv2UdpConfig (UdpSrcCustomIf)	L2tpv2BlockConfig	Config to Udp source custom interface.
UnicastExpectedRxPorts (UnicastExpectedRxPorts)	Port	Traffic sent to this end point is expected to be received as unicast traffic by any of the ports connected through this relation.
UsesIfSource (UsesIf)	AncpAccessNodeConfig, AppPerfClientConfig, AppPerfServerConfig, AutosarTimeSyncConfig, BfdRouterConfig, BridgePortConfig, CifsClientProtocolConfig, CifsServerProtocolConfig, CoapServerConfig, CuspProtocolConfig, Dhcpv4BlockConfig, Dhcpv4ServerConfig, Dhcpv6BlockConfig, Dhcpv6PdBlockConfig, Dhcpv6ServerConfig, Dot1xSupplicantBlockConfig, DpgClientProtocolConfig, DpgServerProtocolConfig, DualStackLiteConfig, EcpriProtocolConfig, EoamNodeConfig, FcEPortConfig, FcFPortConfig, FcHostConfig, FcoeHostConfig, FcoeVePortConfig, FcoeVfPortConfig, FtpClientProtocolConfig, FtpServerProtocolConfig, HttpClientProtocolConfig, HttpServerProtocolConfig, Ieee1588v2ClockConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, Ieee8021asClockConfig, IgmpHostConfig, IgmpRouterConfig, IperfClientProtocolConfig, IperfServerProtocolConfig, Ipv6RapidDeploymentConfig, L2tpv2BlockConfig, L2tpv3BlockConfig, LacpPortConfig, LagBfdPortConfig, LinkOamRouterConfig, LispRouterConfig, LldpNodeConfig, LspPingProtocolConfig, MacsecSupplicantBlockConfig, MldHostConfig, MldRouterConfig, MplsTpConfig, MplsTpOamNodeConfig, MsdpProtocolConfig, NetconfClientConfig, NetconfProtocolConfig, NtpClientConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, Ospfv2RouterConfig, Ospfv3RouterConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, PacketChannel, PcepProtocolConfig, PimRouterConfig, PppoaClientBlockConfig, PppoaServerBlockConfig, PppoeClientBlockConfig, PppoeServerBlockConfig, PppoL2tpv2ClientBlockConfig, PppoL2tpv2ServerBlockConfig, PppoL2tpv3ClientBlockConfig, PppoL2tpv3ServerBlockConfig, PppProtocolConfig, RawTcpClientProtocolConfig, RawTcpServerProtocolConfig, RipRouterConfig, RoEBlockConfig, SaaDeviceConfig, SipUaProtocolConfig, SrpConfig, Srv6OamProtocolConfig, StorageWorkerConfig, SyncEthDeviceConfig, TrillRbridgeConfig, TwampClientConfig, TwampServerConfig, VdpStationConfig, VicAdapterConfig, VideoClientProtocolConfig, VideoServerProtocolConfig, VifConfig, VsiBlockConfig, VxlanVtepConfig, XmppvJClientConfig	Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on).

L2tpv3If Writable Attributes

Attribute

Description

Common Writable Attributes

Active, Name

IfCountPerLowerIf

Interface count.

Type: u32

Default: 1

IfRecycleCount

Interface recycle count.

Type: u32

Default: 0

IsLoopbackIf

Is loopback interface.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	True.
FALSE	False.

IsRange

Is Block a Range or Table.

Type: bool

Default: TRUE

Possible Values:

Value	Description
TRUE	True.
FALSE	False.

LocalSessionId

Local session Id.

Type: u32

Default: 0

LocalSessionIdList

Local session Id list.

Type: u32

Default: 0

LocalSessionIdRepeatCount

Local session Id repeat count.

Type: u32

Default: 0

LocalSessionIdStep

Local session Id step.

Type: s32

Default: 1

RemoteIpv4Addr

Remote IPv4 address.

Type: ip

Default: 192.85.1.3

RemoteIpv4AddrList

Remote IPv4 address list.

Type: ip

Default: 0

RemoteIpv4AddrRepeatCount

Remote IPv4 address stutter.

Type: u32

Default: 0

RemoteIpv4AddrStep

Remote IPv4 address step.

Type: ip

Default: 0.0.0.1

RemoteIpv4AddrStepMask

Remote IPv4 address step mask.

Type: ip

Default: 0.0.0.255

RemoteIpv6Addr

Remote IPv6 address.

Type: ipv6

Default: 2000::2

RemoteIpv6AddrList

Remote IPv6 address list.

Type: ipv6

Default: 0

RemoteIpv6AddrRepeatCount

Remote IPv6 address repeat count.

Type: u32

Default: 0

RemoteIpv6AddrStep

Remote IPv6 address step.

Type: ipv6

Default: 0000::1

RemoteIpv6AddrStepMask

Remote IPv6 address step mask.

Type: ipv6

Default: FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF

RemoteSessionIdList

Remote session Id list.

Type: u32

Default: 0

SessionResolver

Session resolver.

Type: string

Default: default

UdpChecksumEnabled

Udp checksum enabled.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	True.
FALSE	False.

UdpDstPortList

Udp destination port list.

Type: u16

Default: 1701

UdpSrcPort

Udp source port.

Type: u16

Default: 1701

UdpSrcPortList

Udp source port list.

Type: u16

Default: 1701

UdpSrcPortRepeatCount

Udp source port repeat count.

Type: u32

Default: 0

UdpSrcPortStep

Udp source port step.

Type: s16

Default: 1

UseUdp

Use Udp.

Type: bool

Default: FALSE

Possible Values:

Value	Description
TRUE	True.
FALSE	False.

L2tpv3If Read-Only Attributes

Read-Only Attribute

Description

EffectiveBlockCount

Effective block count.

Type: u32

Default: 1

IfState

Interface state.

Type: enum

Default: DISABLED

Possible Values:

Value	Description
READY	Ready.
DISABLED	Disabled.
DELETING	Deleting.
PARTIALLY_READY	Partially ready.

SessionResolveState

Session resolve state.

Type: enum

Default: RESOLVE_NEEDED

Possible Values:

Value	Description
RESOLVE_DONE	Resolve done.
RESOLVE_NEEDED	Resolve needed.
RESOLVE_FAILED	Resolve failed.
RESOLVE_IN_PROGRESS	Resolve in progress.
RESOLVE_PARTIALLY_DONE	Resolve partially done.