OtvEdgeDeviceConfig Object


Description:

OTV emulation protocol configuration for the OTV edge device.

Parents: EmulatedDevice

Children: IsisIihConfig, IsisLspConfig

Result children (automatically created): OtvEdgeDeviceOverlayResults, OtvEdgeDeviceResults, OtvMacReachabilityResults, OtvNeighborResults

Relations:

Side name
(Type)
Relative Description
ClientLoadProfile
(AffiliatedClientLoadProfile)

ClientLoadProfile

Relation to the affiliated client load profile.

AffiliatedProtocolProfile
(AffiliatedProtocolProfile)

OpenflowProtocolProfile, OtvProtocolProfile

Relation to the affiliated protocol profile.

ViewControlPlaneMplsBindingResult
(ControlPlaneBindingResult)

ViewControlPlaneMplsBindingResult

Result of the MPLS control plane binding.

NetworkInterface
(OtvTopLevelIf)

Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf

Relation to the top level interface of the OTV private interface stack.

ConvergenceConfig
(PrimaryPathProtocolConfig)

ConvergenceConfig, ConvergenceConfig

Primary protocol path.

ProtocolConnectionDestination
(ProtocolConnectionDestination)

AutosarTimeSyncConfig, CoapServerConfig, EcpriProtocolConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, MacsecSupplicantBlockConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, TrillRbridgeConfig, VdpStationConfig, VsiBlockConfig, VxlanVtepConfig

Protocol connection destination.

ResultChild
(ResultChild)

OtvEdgeDeviceOverlayResults, OtvEdgeDeviceResults, OtvNeighborResults

Use this to connect a results object to an object.

TimeComparisonPair
(TimeComparisonPairSrcProtocol)

TsnProtocolsTimeComparisonPair, TsnProtocolsTimeComparisonPair

UsesIf
(UsesIf)

Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf

Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on).

OtvEdgeDeviceConfig Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
CsnInterval

Complete sequence numbers PDU interval in seconds.

Type: u16

Default: 10

Range: 1 - 20

DisPriority

DIS priority.

Type: u32

Default: 0

Range: 0 - 127

DynamicLoad

Dynamic load.

Type: s32

Default: 30

Range: 1 - 1000000

EndpointConnectionPattern

Endpoint connection pattern.

Type: enum

Default: PAIR

Possible Values:

Value Description
PAIR

Pairwise connection.

BACKBONE_SRC_FIRST

Backbone source first connection.

BACKBONE_DST_FIRST

Backbone destination first connection.

BACKBONE_INTERLEAVED

Backbone interleaved connection.

FloodDelay

LSP flood delay in milliseconds.

Type: u16

Default: 33

Range: 33 - 3000

HelloInterval

Hello interval in seconds.

Type: u16

Default: 10

Range: 1 - 300

HelloMultiplier

Hello multiplier.

Type: u16

Default: 3

Range: 1 - 100

HostName

Host name.

Type: string

Default: Spirent-1

Range: 1 - 255 characters

LspRefreshTime

LSP refresh time in seconds.

Type: u16

Default: 900

Range: 1 - 65535

RetransmissionInterval

Retransmission interval in seconds.

Type: u16

Default: 5

Range: 1 - 100

SiteId

OTV site ID.

Type: mac

Default: 00:00:00:00:00:01

SystemId

OTV edge device system ID.

Type: mac

Default: 00:00:00:00:00:01

UsePartialBlockState

Use partial block state (unsupported).

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Use partial block state.

FALSE

Do not use partial block state.

UseSrcMacAsSystemId

Use source MAC as the OTV edge device system ID.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Use source MAC as the OTV edge device system ID.

FALSE

Edge device system ID, separate from the source MAC.

OtvEdgeDeviceConfig Read-Only Attributes

Read-Only Attribute Description
Common Read-Only Attributes State
LoadProfileRunState

Load profile run state.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Load profile is running.

FALSE

Load profile is stopped.