Description:
Specifies parameter to configure eCPRI protocol.
Parents: EmulatedDevice
Children: EcpriControlAndUserDataConfig, EcpriCustomMsgConfig, EcpriEventIndicationMsgConfig, EcpriOneWayDelayMeasurementConfig, EcpriOranMsgConfig, EcpriRemoteMemoryAccessConfig, EcpriRemoteResetMsgConfig
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ClientLoadProfile (AffiliatedClientLoadProfile) |
||
| AffiliatedProtocolProfile (AffiliatedProtocolProfile) |
||
| ViewControlPlaneMplsBindingResult (ControlPlaneBindingResult) |
||
| ConvergenceConfig (PrimaryPathProtocolConfig) |
||
| ProtocolConnectionDestination (ProtocolConnectionDestination) |
AutosarTimeSyncConfig, CoapServerConfig, EcpriProtocolConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, MacsecSupplicantBlockConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, TrillRbridgeConfig, VdpStationConfig, VsiBlockConfig, VxlanVtepConfig |
|
| TimeComparisonPair (TimeComparisonPairSrcProtocol) |
TsnProtocolsTimeComparisonPair, TsnProtocolsTimeComparisonPair |
|
| UsesIf (UsesIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf |
Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on). |
| Attribute | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||
| DstMacAddr |
Destination MAC Address Type: mac Default: 01:80:c2:00:00:0e |
||||||||||
| DynamicLoad |
Dynamic load. Type: s32 Default: 30 Range: 1 - 1000000 |
||||||||||
| EcpriEncapsulation |
eCPRI Encapsulation. Type: enum Default: ECPRI_OVER_ETHERNET Possible Values:
|
||||||||||
| EndpointConnectionPattern |
Endpoint connection pattern. Type: enum Default: PAIR Possible Values:
|
||||||||||
| OverrideUPlaneVlan |
User can Override U-Plane VLAN Type: bool Default: FALSE Possible Values:
|
||||||||||
| RequestTimeInterval |
Request Time Interval Type: u32 Default: 10000 |
||||||||||
| Type4ResponseMsgFailureData |
Failure data sent in failed response message Type: u8 Default: 0x01 |
||||||||||
| Type4ResponseMsgReadData |
Read response data Type: u8 Default: 0x01 |
||||||||||
| Type4ResponseMsgSuccessRate |
Success rate percentage Type: u8 Default: 100 Range: 0 - 100 |
||||||||||
| UdpDstPort |
UDP Destination Port Type: u16 Default: 1025 |
||||||||||
| UsePartialBlockState |
Dynamic load. Type: bool Default: FALSE Possible Values:
|
||||||||||
| Version |
Value indicating the protocol version. Type: u8 Default: 1 Range: 0 - 15 |
||||||||||
| VlanIdForUPlane |
VLAN ID for U-Plane Type: u16 Default: 100 Range: 0 - 4095 |
||||||||||
| VlanPriorityForUPlane |
VLAN Priority for U-Plane Type: u8 Default: 7 Range: 0 - 7 |
| Read-Only Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Read-Only Attributes | State | ||||||
| LoadProfileRunState |
Load profile run state. Type: bool Default: FALSE Possible Values:
|