Description:
eCPRI ORAN Message Config
Parents: EcpriProtocolConfig
Attribute | Description | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||||||||||||||||||||||||
BandSectorIdBitWidth |
Bitwidth of Band and Sector Identifier Type: u8 Default: 4 Range: 1 - 13 |
||||||||||||||||||||||||||||||||||
Bandwidth |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Bandwidth of Physical Channel Type: enum Default: BW_50_MHZ Possible Values:
|
||||||||||||||||||||||||||||||||||
BeamformingWeightCount |
Number of beamforming weights to be used in C-Plane message Type: u16 Default: 1 Range: 1 - 256 |
||||||||||||||||||||||||||||||||||
BeamformingWeightIqSampleFile |
Select Beamforming Weight IQ Sample file to be used Type: inputFilePath Default: "" (empty string) |
||||||||||||||||||||||||||||||||||
BeamId |
Beam ID to be used in C-Plane message Type: u16 Default: 0 Range: 0 - 32767 |
||||||||||||||||||||||||||||||||||
CcId |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. CC ID of the ORAN Packet Type: u8 Default: 1 Range: 0 - 15 |
||||||||||||||||||||||||||||||||||
CcIdBitWidth |
Bitwidth of Component-Carrier Identifier Type: u8 Default: 4 Range: 1 - 13 |
||||||||||||||||||||||||||||||||||
CcIdCount |
Number of CC ID Type: u8 Default: 1 Range: 1 - 16 |
||||||||||||||||||||||||||||||||||
CompressionMethod |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Compression method used for IQ data Type: enum Default: BLOCK_FLOATING_POINT Possible Values:
|
||||||||||||||||||||||||||||||||||
ControlPktProcessingTime |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Control Packet Processing Time Type: double Default: 63 Range: 0 - 1000 |
||||||||||||||||||||||||||||||||||
CpLength |
Indicates cyclic prefix length in C-Plane message. Type: u16 Default: 0 |
||||||||||||||||||||||||||||||||||
DuPortIdBitWidth |
Bitwidth of Distributed Unit Identifier Type: u8 Default: 4 Range: 1 - 13 |
||||||||||||||||||||||||||||||||||
EaxcId |
Configure extended Antenna-Carrier identifier Type: u16 Default: 0x0010 Range: 0 - 65535 |
||||||||||||||||||||||||||||||||||
EnableConcatenation |
Value indicating concatenation is enabled or not Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableManualScheduling |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. User can enable the manual scheduling mode Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableSectionExtensions |
User can enable sending of section extensions in control packets Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableSetPrb |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. User can enter number of PRBs per symbol if this is enabled Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
EnableUserDataCompHdr |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. User can enable the User Data Compression Header Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||||||||||||||||||
FftSize |
Indicates the Oran Control Message Frame Structure FFT Size Type: enum Default: FFTSIZE_128 Possible Values:
|
||||||||||||||||||||||||||||||||||
MantissaMode |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Mantissa Mode which specifies IQ data width in bits Type: enum Default: MANTISSA_9_BIT Possible Values:
|
||||||||||||||||||||||||||||||||||
MtuSize |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. MTU value of the packet Type: u16 Default: 1500 Range: 1500 - 9600 |
||||||||||||||||||||||||||||||||||
NumberOfPrbsPerPacket |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Num of PRBs in a Packet Type: u16 Default: 33 Range: 1 - 65535 |
||||||||||||||||||||||||||||||||||
NumberOfRadioFramesToSend |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Num of Radio Frames to be sent Type: u8 Default: 1 Range: 1 - 4 |
||||||||||||||||||||||||||||||||||
NumberOfUplinkPrbs |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Num of PRBs in Uplink Message Type: u16 Default: 66 Range: 0 - 273 |
||||||||||||||||||||||||||||||||||
PrbsPerBundle |
Number of PRBs per bundle in C-Plane message Type: u8 Default: 1 Range: 1 - 255 |
||||||||||||||||||||||||||||||||||
ReMask |
reMask for DL and UL allocation Type: u16 Default: 4095 Range: 0 - 4095 |
||||||||||||||||||||||||||||||||||
Reserved |
Vendor specific value Type: u8 Default: 0 Range: 0 - 7 |
||||||||||||||||||||||||||||||||||
RuPortIdBitWidth |
Bitwidth of spatial stream identifier Type: u8 Default: 4 Range: 1 - 13 |
||||||||||||||||||||||||||||||||||
ScsSymbolMapFile |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Select Scs Symbol Map File to be used Type: inputFilePath Default: "" (empty string) |
||||||||||||||||||||||||||||||||||
SectionExtensionFlags |
Section Extension Flags Type: enum Default: SectionExtensionType1 Possible Values:
|
||||||||||||||||||||||||||||||||||
SectionId |
Section ID Type: u16 Default: 1 Range: 0 - 4095 |
||||||||||||||||||||||||||||||||||
SectionType |
Indicates Section Type in C-Plane message Type: enum Default: TYPE1 Possible Values:
|
||||||||||||||||||||||||||||||||||
SelectedIqSampleFile |
Parsed IQ Sample Files to be used Type: string Default: IQ |
||||||||||||||||||||||||||||||||||
SubCarrierSpacing |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Sub carrier spacing of channel Type: enum Default: SCS_60_KHZ Possible Values:
|
||||||||||||||||||||||||||||||||||
UplinkControlPktProcessingTime |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Uplink Control Packet Processing Time Type: double Default: 0 Range: 0 - 1000 |
Read-Only Attribute | Description |
---|---|
NumberOfPrbsPerSymbol |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Number of PRBs to be sent per symbol if set PRB is enabled Type: u16 Default: 66 |