Description:
Vxlan VTEP Configuration
Parents: EmulatedDevice
Result children (automatically created): VxlanVtepBindingResults
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| ClientLoadProfile (AffiliatedClientLoadProfile) |
Clear the configuration |
|
| AffiliatedProtocolProfile (AffiliatedProtocolProfile) |
Affiliated Protocols Profile |
|
| ViewControlPlaneMplsBindingResult (ControlPlaneBindingResult) |
Result of the MPLS control plane binding. |
|
| ConvergenceConfig (PrimaryPathProtocolConfig) |
Primary protocol path. |
|
| ProtocolConnectionDestination (ProtocolConnectionDestination) |
AutosarTimeSyncConfig, CoapServerConfig, EcpriProtocolConfig, Ieee80211AccessPointConfig, Ieee80211ClientConfig, MacsecSupplicantBlockConfig, OamFlexeClientConfig, OpenflowControllerProtocolConfig, OpflexDeviceConfig, OseSwitchConfig, OtvEdgeDeviceConfig, OtvSiteDeviceConfig, OvsdbServerConfig, TrillRbridgeConfig, VdpStationConfig, VsiBlockConfig, VxlanVtepConfig |
Connection to the protocol |
| ResultChild (ResultChild) |
Use this to connect a results object to an object. |
|
| TimeComparisonPair (TimeComparisonPairSrcProtocol) |
TsnProtocolsTimeComparisonPair, TsnProtocolsTimeComparisonPair |
|
| UsesIf (UsesIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf |
Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on). |
| Attribute | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||
| AutoSelectUdpSrcPort |
Auto select UDP port for VTEP Type: bool Default: TRUE Possible Values:
|
||||||||||
| ConnectedIpList |
Connected DUT IP list, for OVSDB learning. Type: ip Default: 192.85.1.1 |
||||||||||
| DynamicLoad |
DynamicLoad Type: s32 Default: 30 Range: 1 - 1000000 |
||||||||||
| EnableEvpnRouteReflector |
Enable/Disable EVPN route reflector. Type: bool Default: FALSE Possible Values:
|
||||||||||
| EndpointConnectionPattern |
EndpointConnectionPattern Type: enum Default: PAIR Possible Values:
|
||||||||||
| EvpnLearningEnabled |
Enable EVPN Learning mode in VETP it will enable BGP Device Type: bool Default: FALSE Possible Values:
|
||||||||||
| EvpnRouteReflectorDeviceList |
EVPN route reflector device list, to hold the selected BGP/EVPN device handles. Type: handle Default: 0 |
||||||||||
| MulticastType |
Type of the Multicast by default IGMP Type: enum Default: MULTICAST_IGMP Possible Values:
|
||||||||||
| OvsdbLearningEnabled |
Enable OVSDB Learning mode for VETP Type: bool Default: FALSE Possible Values:
|
||||||||||
| UdpChecksumEnabled |
selecting UDP checksum Type: bool Default: FALSE Possible Values:
|
||||||||||
| UdpSrcPort |
UDP source port value Type: u16 Default: 1025 |
||||||||||
| UseGatewayAsDut |
Use default gateway,when OVSDB Learning enabled on VTEP. Type: bool Default: TRUE Possible Values:
|
||||||||||
| UsePartialBlockState |
UsePartialBlockState Type: bool Default: FALSE Possible Values:
|
||||||||||
| VtepTunnelIpAddress |
Selecting the Tunnel IP Address Type: enum Default: INTERFACE_IP Possible Values:
|
| Read-Only Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Read-Only Attributes | State | ||||||
| LearnedBindingsCount |
Learned Binding count Type: u32 Default: 0 |
||||||
| LoadProfileRunState |
LoadProfileRunState Type: bool Default: FALSE Possible Values:
|
||||||
| ResolvedVmMacsCount |
Resolved VM MAC address count Type: u32 Default: 0 |
||||||
| UnResolvedVmMacsCount |
Unresolved VM MAC address count Type: u32 Default: 0 |