Description:
VPN site information MPLS TP statics.
Parents: Project, VpnIdGroup
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| Member (MemberOfVpnIdGroup) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EmulatedDevice, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, Port, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VpnIdGroup, VxlanGpeIf, VxlanIf |
|
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| AttachmentGroupId |
Attachment group ID. Type: string Default: 100:1 |
||||||
| AttachmentGroupIdStep |
Attachment group ID step. Type: string Default: 0:0 |
||||||
| EnableControlWord |
Enable control word. Type: bool Default: FALSE Possible Values:
|
||||||
| IntermediateSPeIpv4Addr |
Intermediate S-PE IPv4 Address Type: ip Default: 192.85.1.1 |
||||||
| IntermediateSPeIpv4PrefixLength |
Intermediate S-PE IPv4 Prefix Length Type: u8 Default: 32 Range: 1 - 32 |
||||||
| LspId |
LSP ID. Type: u16 Default: 1 |
||||||
| LspIdStep |
LSP ID step. Type: u16 Default: 1 |
||||||
| PseudowireCount |
Pseudowire Count. Type: u16 Default: 1 |
||||||
| PseudowireType |
Pseudowire Type Type: enum Default: SINGLE_SEGMENT Possible Values:
|
||||||
| SrcAttachmentCircuitId |
Source attachment circuit ID. Type: string Default: 10.0.0.1 |
||||||
| SrcAttachmentCircuitIdStep |
Source attachment circuit ID step. Type: string Default: 0.0.0.1 |
||||||
| SrcNodeId |
Source node ID. Type: string Default: 192.85.1.1 |
||||||
| SrcNodeIdStep |
Source node ID step. Type: string Default: 0.0.0.1 |
||||||
| SrcTunnelNum |
Source tunnel number. Type: u16 Default: 1 |
||||||
| SrcTunnelNumStep |
Source tunnel number step. Type: u16 Default: 1 |
There are no read-only attributes.