Optional. Applies only to (*,G) groups.
The Prune source address block (Prune IP address and Prune Prefix length)
represents the source range from which (*,G) groups request that NO traffic be sent (i.e.,
send traffic for this group, except from this source).
This field is optional, since the exception requirement is not always necessary.
Join/Prune messages corresponding to this (*,G) group will include the specified address in
their Prune list.
Side name
(Type) |
Relative |
Description |
DstBoundTo (DstBinding) |
PathDescriptor, StreamBlock
|
Specifies destination endpoints bound to StreamBlock.
|
EncapsulationSource (Encapsulation) |
PathDescriptor
|
Specifies the encapsulation.
|
MemberOfVpn (MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
MulticastExpectedRxPorts (MulticastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
OptionallyStackedUnder (OptionallyStackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies an optionally-selected lower interface in the stack. Selection is
controlled by protocol implementations which decide based on other criteria whether they
should include the target interface in their stack.
|
SrcBoundTo (SrcBinding) |
PathDescriptor, StreamBlock
|
Specifies the source endpoint bound to StreamBlock.
|
StackedOn (StackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies network endpoint stacking.
|
UnicastExpectedRxPorts (UnicastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
VpnTag (VpnTag) |
VpnTag
|
|
Attribute |
Description |
Common Writable Attributes
|
Active, Name
|
AddrIncrement
|
Not used with this object.
Type: u32
Default: 1
|
AddrIncrementPerRouter
|
NOTE: This attribute is deprecated. It will be removed in subsequent releases,
so it is recommended that you do not use it.
Not used with this object.
Type: u32
Default: 0
|
AddrModifierTypePerDevice
|
Address Modifier Type per Device in Device Block.
Type: enum
Default: CONTINUOUS
Possible Values:
Value |
Description |
CONTINUOUS |
Continuous.
|
REPEAT |
Repeat.
|
|
NetworkCount
|
Not used with this object.
Type: u32
Default: 1
|
NetworkInterfaceWithIpList
|
Create Network Interface for Network Block IP List.
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Yes.
|
FALSE |
No.
|
|
PrefixLength
|
Prefix length of the pruned Source IP address.
Type: u8
Default: 24
Range: 0 - 32
|
StartIpList
|
Starting IP address of Prune source range. Note: Only the first IP address in the
list is used.
Type: ip
Default: 192.0.1.0
|
UseUniqueIpForOverlappingPrefixes
|
Use Unique IP for Overlapping Prefixes
Type: bool
Default: FALSE
Possible Values:
Value |
Description |
TRUE |
Enable Use Unique IP for Overlapping Prefixes option
|
FALSE |
Disable Use Unique IP for Overlapping Prefixes option
|
|
There are no read-only attributes.