VLAN block object.
Side name
(Type) |
Relative |
Description |
DstBoundTo
(DstBinding) |
PathDescriptor, StreamBlock
|
Specifies destination endpoints bound to StreamBlock.
|
EncapsulationSource
(Encapsulation) |
PathDescriptor
|
Specifies the encapsulation.
|
MemberOfVpn
(MemberOfVpn) |
EthernetVpnSiteInfo, VpnIdGroup, VpnSiteInfo6Pe, VpnSiteInfoMplsTpStatic, VpnSiteInfoRfc2547, VpnSiteInfoRfc4659, VpnSiteInfoVplsBgp, VpnSiteInfoVplsLdp
|
Do not use, to be removed
|
MulticastExpectedRxPorts
(MulticastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as multicast traffic by
any of the ports connected through this relation.
|
OptionallyStackedUnder
(OptionallyStackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies an optionally-selected lower interface in the stack. Selection is
controlled by protocol implementations which decide based on other criteria whether they
should include the target interface in their stack.
|
SrcBoundTo
(SrcBinding) |
PathDescriptor, StreamBlock
|
Specifies the source endpoint bound to StreamBlock.
|
StackedOn
(StackedOnEndpoint) |
Aal5If, Dhcpv4ServerDefaultPoolConfig, Dhcpv4ServerPoolConfig, Dhcpv6ServerAddrPoolConfig, Dhcpv6ServerDefaultAddrPoolConfig, Dhcpv6ServerDefaultPrefixPoolConfig, Dhcpv6ServerPrefixPoolConfig, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv4NetworkBlock, Ipv4VpnMcastNetworkBlock, Ipv6If, Ipv6NetworkBlock, Ipv6SrhIf, Ipv6VpnMcastNetworkBlock, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacBlock, MacsecIf, MplsIf, Pimv4JoinSrc, Pimv4PruneSrc, Pimv6JoinSrc, Pimv6PruneSrc, PppIf, PppoeIf, PppoeServerIpv4PeerPool, PppoxServerIpv4PeerPool, PppoxServerIpv6PeerPool, TrillIf, VbrasIf, VlanBlock, VlanIf, VxlanGpeIf, VxlanIf
|
Specifies network endpoint stacking.
|
UnicastExpectedRxPorts
(UnicastExpectedRxPorts) |
Port
|
Traffic sent to this end point is expected to be received as unicast traffic by any
of the ports connected through this relation.
|
VpnTag
(VpnTag) |
VpnTag
|
|
| Attribute |
Description |
|
Common Writable Attributes
|
Active, Name
|
|
AddrIncrement
|
VLAN ID increment.
Type: u32
Default: 1
|
|
AddrIncrementPerRouter
|
NOTE: This attribute is deprecated. It will be removed in subsequent releases,
so it is recommended that you do not use it.
Per router address increment.
Type: u32
Default: 0
|
|
AddrModifierTypePerDevice
|
Type: enum
Default: CONTINUOUS
Possible Values:
| Value |
Description |
| CONTINUOUS |
|
| REPEAT |
|
|
|
Cfi
|
VLAN CFI.
Type: u8
Default: 1
Range: 0 - 1
|
|
NetworkCount
|
Number of VLANs.
Type: u32
Default: 1
|
|
NetworkInterfaceWithIpList
|
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
|
| FALSE |
|
|
|
Priority
|
VLAN priority.
Type: u8
Default: 1
Range: 0 - 7
|
|
StartVlanList
|
Start VLAN ID list.
Type: u16
Default: 100
Range: 0 - 4095
|
|
UseUniqueIpForOverlappingPrefixes
|
Use Unique IP for Overlapping Prefixes
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
Enable Use Unique IP for Overlapping Prefixes option
|
| FALSE |
Disable Use Unique IP for Overlapping Prefixes option
|
|
There are no read-only attributes.