MplsForwardingLink Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Link between an IP device and an MPLS enabled device. The packet of IP device will be forward through the MPLS tunnel created by the MPLS device if tunnel is available. In most cases, L3ForwardingLink should be used instead of MplsForwardingLink.

Parents: EmulatedDevice

Relations:

Side name
(Type)		 Relative Description
Container
(ContainedLink)

AncpCpeToDslamLink, Dhcpv4RelayAgentLink, Dhcpv6IaidHostLink, Dhcpv6RelayAgentLink, EmulatedDevice, EnhancedL47ForwardingLink, Ipv6TransitionLink, L2tpv3ForwardingLinkGroup, L3ForwardingLink, VrfCustomerLink, VrfProviderLink

Contained link.
NetworkLinkDestination
(LinkDst)

Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf

Link destination.
LinkDstDevice
(LinkDstDevice)

EmulatedDevice

Link destination device.
NetworkLinkSource
(LinkSrc)

Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf

Link source.

MplsForwardingLink Writable Attributes

Attribute Description
Common Writable Attributes Active, Name

MplsForwardingLink Read-Only Attributes

Read-Only Attribute Description
LinkStatus

Link status.

Type: enum

Default: ACTIVE

Possible Values:

Value Description
DISABLED

Disabled
ACTIVE

Active
STANDBY

Standby
LinkType

Name of Link Type.

Type: string

Default: "" (empty string)