Description:
IPv6 rapid deployment configuration.
Parents: EmulatedDevice
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ViewControlPlaneMplsBindingResult (ControlPlaneBindingResult) |
MPLS control plane binding result. |
|
ConvergenceConfig (PrimaryPathProtocolConfig) |
|
|
TimeComparisonPair (TimeComparisonPairSrcProtocol) |
TsnProtocolsTimeComparisonPair, TsnProtocolsTimeComparisonPair |
|
UsesIf (UsesIf) |
Aal5If, EthIIIf, FcIf, GreIf, GroupIf, HdlcIf, Ipv4If, Ipv6If, Ipv6SrhIf, ItagIf, L2tpv2If, L2tpv3If, LispIf, MacsecIf, MplsIf, PppIf, PppoeIf, TrillIf, VbrasIf, VlanIf, VxlanGpeIf, VxlanIf |
Specifies the interfaces used by the configuration object (configuration object examples: BgpRouterConfig, LdpRouterConfig, and so on). |
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||
CustomerEdgePrefixLength |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Customer edge prefix length. Type: u8 Default: 0 Range: 0 - 32 |
||||||
DUTAddress |
Device under test address. Type: ip Default: 192.85.1.1 |
||||||
Ipv4MaskLength |
Length of the IPv4 mask. Type: u8 Default: 0 Range: 0 - 32 |
||||||
RapidDeploymentPrefix |
Rapid deployment prefix. Type: ipv6 Default: 2002:: |
||||||
RapidDeploymentPrefixLength |
Rapid deployment prefix length. Type: u8 Default: 32 Range: 16 - 128 |
||||||
SubnetInterfaceId |
Subnet interface ID. Type: u32 Default: 0 |
||||||
SubnetInterfaceIdLength |
Subnet interface ID length. Type: u8 Default: 0 |
||||||
TransitionMode |
Transition mode. Type: enum Default: SIX_RD Possible Values:
|
||||||
UsePartialBlockState |
Use partial block state. Type: bool Default: FALSE Possible Values:
|
There are no read-only attributes.