Ethernet10GigFiber Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Ethernet 10 Gig Fiber PHY. Provides parameters specific to ports with an Ethernet 10 Gig interface.

Parents: Port

Children: Mdio, Mii, PhyCompensationOptions

Automatically-created children: EthernetWan

Relations:

Side name
(Type)		 Relative Description
ActivePhyPort
(ActivePhy)

Port

Active physical relation.
ApplicableOnPhySource
(ApplicableOnPhy)

EthIIIf

Specifies physical layer compatibility

Ethernet10GigFiber Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
AdvertiseIEEE

Set to advertise IEEE.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
AdvertiseNBASET

Set to advertise NBASE-T.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
AlternateSpeeds

Alternate speeds.

Type: enum

Default: SPEED_UNKNOWN

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
AnAdvMode

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

Type: enum

Default: CONSORTIUM

Possible Values:

Value Description
NONE

CONSORTIUM

BROADCOM

AutoNegotiation

Auto negotiation.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enable
FALSE

Disable
AutoNegotiationMasterSlave

Sets the port to be Master or Slave for auto negotiation.

Type: enum

Default: MASTER

Possible Values:

Value Description
SLAVE

Slave
MASTER

Master
FAULT

Fault
AutoNegotiationMasterSlaveEnable

Auto negotiation master slave enable.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
BusTerminationNode

Bus Termination Node.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
CableTypeLength

Cable type and length.

Type: enum

Default: OPTICAL

Possible Values:

Value Description
OPTICAL

Optical.
COPPER_0M_2M

Copper 0M-2M.
COPPER_3M

Copper 3M.
COPPER_5M

Copper 5M.
COPPER_7M

Copper 7M.
COPPER_0M_1M

Copper 0M-1M.
COPPER_2M

Copper 2M.
COPPER_5M_ACTIVE

Copper 5M active.
COPPER_7M_ACTIVE

Copper 7M active.
LOOPBACK

CfpInterface

CFP interface.

Type: enum

Default: ACC_6068A

Possible Values:

Value Description
ACC_6068A

ACC 8086A.
ACC_6069A

ACC 6069A.
ACC_6068A_CISCO_100G_SR10

ACC 6068A CISCO 100G SR10.
ACC_6069A_CISCO_40G_SR4

ACC 6069A CISCO 40G SR4.
CISCO_FINISAR_100G_LR4_v1_5

CISCO FINISAR 100G LR4 v1.5.
OTHER_CFP

Other CFP.
LR4_100GBASE

LR4 100GBASE.
SR10_100GBASE

SR10 100GBASE.
CXP_SR10_100GBASE

CXP SR10 100GBASE.
CFP4_LR4_100GBASE

CFP4 LR4 100GBASE.
CFP4_SR4_100GBASE

CFP4 SR4 100GBASE.
CFP4_CR4_100GBASE

CFP4 CR4 100GBASE.
QSFP28_LR4_100GBASE

QSFP28 LR4 100GBASE.
QSFP28_SR4_100GBASE

QSFP28 SR4 100GBASE.
QSFP28_CR4_100GBASE

QSFP28 CR4 100GBASE.
QSFP28_AOC_100GBASE

QSFP28 AOC 100GBASE.
CollisionExponent

Sets the exponent used in the collision back-off algorithm. Larger exponents indicate larger back-off times after collisions occur.

Type: u8

Default: 10

Range: 1 - 10
Ctle

Continuous Time Linear Equalization

Type: s16

Default: 0
CustomFecMode

Set to configure the custom Fec mode on the port.

Type: enum

Default: KR_FEC

Possible Values:

Value Description
NONE

No custom FEC mode.
KR_FEC

KR FEC mode.
RS_FEC

RS FEC mode.
KP4_FEC

KP4 FEC mode.
DataPathMode

Sets the path for the port to transmit data.

Type: enum

Default: NORMAL

Possible Values:

Value Description
NORMAL

Port will transmit normally.
LOCAL_LOOPBACK

Port will transmit in a loopback mode, so transmitted data will be received by the transmitting port without going out on the wire.
LINE_MONITOR

Port will be placed in line monitor mode. All received packets will be transmitted as is but can also be captured on the port.
DeficitIdleCount

Deficit idle count.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable
FALSE

Disable
DetectionMode

Detection mode.

Type: enum

Default: AUTO_DETECT

Possible Values:

Value Description
AUTO_DETECT

Auto detect.
MANUAL

Manual.
ADVANCED

Advanced.
DownshiftEnable

Set to enable or disable Downshift on the port.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
Duplex

Type of duplex to use.

Type: enum

Default: FULL

Possible Values:

Value Description
HALF

Half duplex.
FULL

Full duplex.
Enable8023brPerPort

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

FALSE

FlowControl

Flow control (PAUSE frames).

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable
FALSE

Disable
ForwardErrorCorrection

Forward error correction(FEC).

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IgnoreLinkStatus

Allow the port to continue transmitting traffic if the link(s) with its peer port(s) goes down. NOTE: Feature availability depends on module/card type.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
InternalPpmAdjust

PPM value to adjust the IEEE clock frequency tolerance. This value affects the transmit clock frequency when Transmit Clock Source is set to InternalPpmAdj.

Type: s32

Default: 0

Range: -105 - 105
IsPfcNegotiated

Specifies if priority flow control is negotiated by DCBX.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Priority flow control is negotiated by DCBX.

FALSE

Priority flow control is not negotiated by DCBX.

LineSpeed

Sets the line speed for the port. Only SPEED_10G is supported on Ethernet 10 Gig ports. In general, use the SupportedSpeeds attribute to determine compatibility.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.
SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.

SPEED_5G

5 GBPS.
SPEED_50G

50GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
Mtu

Maximum transmission unit in bytes.

Type: u32

Default: 1500

Range: 0 - 16383
MultidropNodeRole

Multidrop Node Role.

Type: enum

Default: COORDINATOR

Possible Values:

Value Description
COORDINATOR

Coordinator.
FOLLOWER

Follower.
OptimizedXon

Optimized Xon.

Type: enum

Default: DISABLE

Possible Values:

Value Description
DISABLE

Disable.
ENABLE

Enable.
PerformanceMode

Performance Mode is a mode that pre-defines cut through, VFD, Rx streams and the number of Rx statistics reported.

Type: enum

Default: STC_DEFAULT

Possible Values:

Value Description
STC_DEFAULT

STC Default Mode.
STC_PERF

STC Perf Mode.
STC_ROUTING

STC Routing Mode.
STC_DENSITY

STC Density Mode.
STC_ADVTSN

STC AdvTsn Mode.
STC_L1

STC L1 Mode.
STC_MGIG

STC MGiG Mode.
STC_ROCEV2

STC RoCEv2 Mode.
STC_NRZ

STC NRZ Mode.
STC_SCALING

STC Emulation Scale Mode.
STC_NRZ_L1

NRZ L1 mode
STC_MGIG_ADVTSN

NRZ L1 mode
STC_LOW_DENSITY

Low density mode
STC_AP_HIGH_PERF

Appliance High performance mode
STC_ADVFT

Adv Flow Tracking Mode.
STC_ROCEV2_CCL

PfcCableDelay

Length of PFC cable delay.

Type: double

Default: 0.0
PfcCableDelayType

Type of Cable to simulate PFC delay.

Type: enum

Default: FIBER

Possible Values:

Value Description
FIBER

Fiber cable.
COPPER

Copper cable.
PLCABurstTimer

Maximum number of time to transmit in Bit Time (1BT=100ns).

Type: u8

Default: 128
PLCAEnable

Is PLCA Enabled.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
PLCALocalId

Local ID for PLCA node.

Type: u8

Default: 0

Range: 0 - 255
PLCAMaxBurstCount

Maximum number of frames to transmit.

Type: u8

Default: 0

Range: 0 - 255
PLCAMaxNodeCount

PLCA maximum number of nodes.

Type: u8

Default: 1

Range: 1 - 255
PLCATxOpportunityTimer

PLCA Transmit Opportunity Timer in Bit Time (1BT=100ns).

Type: u8

Default: 32
PortMode

Port mode.

Type: enum

Default: LAN

Possible Values:

Value Description
LAN

LAN
WAN

WAN
PortSetupMode

Exclusively configures port setup or hardware register parameters.

Type: enum

Default: PORTCONFIG_ONLY

Possible Values:

Value Description
PORTCONFIG_ONLY

Only setup port setup parameters.
REGISTERS_ONLY

Only setup hardware register parameters (MII or MDIO).
PriorityFlowControlArray

Array of boolean priority bit values (8 bits).

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable the nth bit.

FALSE

Disable the nth bit.

RxBufferErrorCheckingDisable

Disable RX Buffer Error Checking.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

FALSE

T1SMode

T1S Mode.

Type: enum

Default: MULTIDROP

Possible Values:

Value Description
P2P

P2P.
MULTIDROP

Multidrop.
TestMode

Test mode.

Type: enum

Default: NORMAL_OPERATION

Possible Values:

Value Description
NORMAL_OPERATION

Normal operation.
TRANSMIT_DROOP

Transmit droop.
MASTER_TRANSMIT_JITTER

Master transmit jitter.
SLAVE_TRANSMIT_JITTER

Slave transmit jitter.
TRANSMITTER_DISTORTION

Transmitter distortion.
NORMAL_OPERATION_FULL_POWER

Normal operation full power.
TransceiverCage

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

Transceiver Cage

Type: u32

Default: 1

Range: 1 - 2
TransmitClockSource

Transmit clock source.

Type: enum

Default: INTERNAL

Possible Values:

Value Description
INTERNAL

Internal
INTERNAL_PPM_ADJ

Adjust the clock PPM within the IEEE clock frequency.
BITS

Bits
LOOP

Loop
EXTERNAL

External
TxDeEmphasisPostTap

Transmit de-emphasis post tap.

Type: s16

Default: 13
TxDeEmphasisPreTap

Transmit de-emphasis pre tap.

Type: s16

Default: 0
TxMainTapSwing

Transmit main tap swing.

Type: s16

Default: 15

Ethernet10GigFiber Read-Only Attributes

Read-Only Attribute Description
AdvertisementType

Advertisement Type.

Type: enum

Default: IEEE

Possible Values:

Value Description
NA

Not Applicable.
IEEE

IEEE.
NBASET

NBASE-T.
AutoNegotiationMasterSlaveStatus

Auto negotiation master slave status.

Type: enum

Default: MASTER

Possible Values:

Value Description
SLAVE

Slave.
MASTER

Master.
FAULT

Fault.
AutoNegotiationStatus

Auto negotiation status.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
CustomFecModeKrRsStatus

State of the custom FEC mode of this port.

Type: enum

Default: NONE

Possible Values:

Value Description
NONE

No custom FEC mode.
KR_FEC

KR FEC mode.
RS_FEC

RS FEC mode.
KP4_FEC

KP4 FEC mode.
CustomFecModeStatus

Custom Fec mode status.

Type: string

Default: None
CustomFecTypeStatus

Custom Fec type status.

Type: string

Default: None
DownshiftStatus

State of Downshift on this port.

Type: enum

Default: DISABLED

Possible Values:

Value Description
DISABLED

Downshift Disabled.
DOWNSHIFT_NOT_OCCURRED

DownShift not Occurred.
DOWNSHIFT_FROM_1G

Downshift from 1G.
DOWNSHIFT_FROM_2_5G

Downshift from 2.5G.
DOWNSHIFT_FROM_5G

Downshift from 5G.
DOWNSHIFT_FROM_10G

Downshift from 10G.
DuplexStatus

Status of the duplex.

Type: enum

Default: FULL

Possible Values:

Value Description
HALF

Half duplex.
FULL

Full duplex.
ForceAutoNegotiationFor1GSpeed

Force auto negotiation.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable
FALSE

Disable
ForwardErrorCorrectionStatus

Forward error correction status.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsAnAdvModeConfigurable

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

FALSE

IsEnforceMtuOnRxSupported

Enforce MTU for RX control support.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsL1WebGuiSupported

Is L1 web Gui supported.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsPfcDcbxWarningSupported

Is Priority Flow Control DCBX warning supported.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsPriorityFlowControlSupported

Specifies whether priority flow control is supported.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Priority flow control is supported.

FALSE

Priority flow control is not supported.

IsSpeedAutoNegotiationConfigurable

Is speed auto negotiation configurable.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsUitSupported

Is the User Inserted Timestamp feature supported.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IsWanSupported

WAN support.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
LearntCtle

Learnt CTLE (Continuous time linear equalization).

Type: s16

Default: 255
LearntTxMainTap

Learnt Tx Learnt Tx Main Tap.

Type: s16

Default: 255
LearntTxPostEmphasis

Learnt Tx Post-Emphasis.

Type: s16

Default: 255
LearntTxPreEmphasis

Learnt Tx Pre-Emphasis.

Type: s16

Default: 255
LicensedSpeeds

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
LineSpeedStatus

Line speed status.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
LinkStatus

Status of link.

Type: enum

Default: NONE

Possible Values:

Value Description
DOWN

Link is DOWN.
UP

Link is UP.
ERROR

Link has error.
ADMIN_DOWN

Link is administratively down.
UP_SW_DISABLED

The link is up, but is disabled by software.
SONET

Link is SONET.
NONE

No Link Present.
ModuleFwVersion

Module firmware version.

Type: string

Default: N/A
ModuleHwVersion

Module hardware version.

Type: string

Default: N/A
ModuleType

Module type plugs into the PersonalityCardType.

Type: enum

Default: NA

Possible Values:

Value Description
NA

Hot-plugging module is not supported.
UNKNOWN

A module has been plugged in but cannot be identified.
ABSENT

No module plugged in.
SFP_FIBER

SFP fiber media.
SFP_Copper

SFP copper media.
XFP

XFP
XENPAK

Xenpak
X2

X2
E1000

E1000

TEN_GBASE_T

10GBASE-T
SFP_PLUS

SFP Plus

CFP

CFP
QSFP_PLUS

QSFP Plus
CXP

CXP
CFP2

CFP2
CFP4

CFP4
QSFP28

QSFP28
IEEE80211

IEEE 802.11
SFP28

SFP28
CFP8

CFP8
QSFPDD

QSFPDD

OSFP

OSFP
FLEXE

FLEXE
QSFP56

QSFP56
QSFP_PLUS_CMIS

QSFP Plus CMIS
NRZLicenses

NRZ Licensed Speeds.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
PerformanceModeStatus

Current status of the Performance Mode.

Type: enum

Default: STC_DEFAULT

Possible Values:

Value Description
STC_DEFAULT

STC Default Mode.
STC_PERF

STC Perf Mode.
STC_ROUTING

STC Routing Mode.
STC_DENSITY

STC Density Mode.
STC_ADVTSN

STC AdvTsn Mode.
STC_L1

STC L1 Mode.
STC_MGIG

STC MGiG Mode.
STC_ROCEV2

STC RoCEv2 Mode.
STC_NRZ

STC NRZ Mode.
STC_SCALING

STC Emulation Scale Mode.
STC_NRZ_L1

NRZ L1 mode
STC_MGIG_ADVTSN

NRZ L1 mode
STC_LOW_DENSITY

Low density mode
STC_AP_HIGH_PERF

Appliance High performance mode
STC_ADVFT

Adv Flow Tracking Mode.
STC_ROCEV2_CCL

PersonalityCardType

Personality card type. This is the plugin module to the host card.

Type: enum

Default: NA

Possible Values:

Value Description
NA

Hot-plugging personality card is not supported.
UNKNOWN

A personality card has been plugged in but cannot be identified.
ABSENT

No personality card plugged in.
SFP

SFP
XFP

XFP
XENPAK

Xenpak
X2

X2
TEN_GBASE_T

10GBASE-T
CFP

CFP
CFP_QSFP

CFP QSFP
CFP_CXP

CFP CXP
CFP2

CFP2
CFP2_CXP

CFP2 CXP
CFP2_CFP4

CFP2 CFP4
CFP2_QSFP28

CFP2 QSFP28
CFP4

CFP4
QSFP28

QSFP28
IEEE80211

IEEE 802.11
SFP28

SFP28
CFP8

CFP8
QSFP_PLUS

QSFP_PLUS
QSFPDD

QSFPDD

OSFP

OSFP
QSFP56

QSFP56
QSFP_PLUS_CMIS

QSFP_PLUS_CMIS
PfcTxQueueCount

Number of priority flow control transmit queues supported on this card.

Type: u8

Default: 0
PLCAStatus

PLCA Status.

Type: enum

Default: NA

Possible Values:

Value Description
NA

NA.
REGULAR_TX_RX

Regular_TX_RX.
IRREGULAR_TX_RX

Irregular_TX_RX.
PriorityFlowControlStatusArray

Status array of boolean priority bit values (8 bits).

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Nth bit is enabled.

FALSE

Nth bit is disabled.

QualifiedState

Qualified state.

Type: enum

Default: UNVERIFIED

Possible Values:

Value Description
UNVERIFIED

Unverified
QUALIFIED

Qualified
KNOWN_WORKING

Known working
SupportedManagementRegisters

Management Registers type supported on a port.

Type: enum

Default: NONE

Possible Values:

Value Description
NONE

None.
MII

MII registers.
GMII

GMII registers.
MDIO

MDIO registers.
SupportedSpeeds

List of supported line speeds.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.
TransceiverCageIndex

Transceiver Cage Index

Type: u32

Default: 0
TransceiverType

Displays the first transceiver type presented by the hardware.

Type: enum

Default: MODULE_NONE

Possible Values:

Value Description
MODULE_NONE

None
MODULE_10GBASE_ER

10GBASE-ER
MODULE_10GBASE_LR

10GBASE-LR
MODULE_10GBASE_SR

10GBASE-SR
MODULE_10GBASE_EW

10GBASE-EW
MODULE_10GBASE_LW

10GBASE-LW
MODULE_10GBASE_SW

10GBASE-SW
MODULE_10GBASE_CX4

10GBASE-CX4
MODULE_10GBASE_LX4

10GBASE-LX4
SPIRENT_10GBASE_CX4

Spirent 10GBASE-CX4
MODULE_OC48_LR

OC48-LR
MODULE_OC48_IR

OC48-IR
MODULE_OC48_SR

OC48-SR
MODULE_OC12_LR

OC12-LR
MODULE_OC12_IR

OC12-IR
MODULE_OC12_SR

OC12-SR
MODULE_OC3_LR

OC3-LR
MODULE_OC3_IR

OC3-IR
MODULE_OC3_SR

OC3-SR
MODULE_OC192_LR

OC192-LR
MODULE_OC192_IR

OC192-IR
MODULE_OC192_SR

OC192-SR
MODULE_OC192_VR

OC192-SR
MODULE_10GBASE_T

10GBASE-T
MODULE_XFP_CX4

XFP-CX4
MODULE_XFP_E

XFP-E
MODULE_1000BASE_T

1000BASE-T
MODULE_1000BASE_CX

1000BASE-CX
MODULE_1000BASE_LX

1000BASE-LX
MODULE_1000BASE_SX

1000BASE-SX
MODULE_40GBASE_LR

40GBASE-LR
MODULE_40GBASE_SR

40GBASE-SR
MODULE_40GBASE_CR4

40GBASE-CR4
MODULE_40GBASE_SR4

40GBASE-SR4
MODULE_40GBASE_LR4

40GBASE-LR4
MODULE_100GBASE_LR

100GBASE-LR
MODULE_100GBASE_SR

100GBASE-SR
MODULE_100GBASE_SR10

100GBASE-SR10
MODULE_100GBASE_CR10

100GBASE-CR10
MODULE_100GBASE_LR4

100GBASE-LR4
MODULE_FC_2G

FC-2G
MODULE_FC_4G

FC-4G
MODULE_FC_8G

FC-8G
MODULE_FC_10G

FC-10G
MODULE_100BASE_FX

100BASE-FX

MODULE_SFP_PLUS_COPPER

SFP Plus Copper

MODULE_QSFP_ALPHA_BETA

QSFP Alpha Beta
MODULE_SFP_100BASE_LX

SFP 100BASE-LX
MODULE_SFP_GBE_BASE_BX10

SFP GBEBASE-BX10
MODULE_SFP_GBE_BASE_PX

SFP GBEBASE-PX
MODULE_CXP_ALPHA_BETA

CXP Alpha Beta
MODULE_100GBASE_CR4

100GBASE-CR4
MODULE_100GBASE_SR4

100GBASE-SR4
MODULE_100GBASE_AOC

100GBASE-AOC
MODULE_IEEE80211_N

IEEE802.11 N
MODULE_IEEE80211_AC

IEEE802.11 AC
MODULE_25GBASE_CR4

25GBASE-CR4
MODULE_25GBASE_SR4

25GBASE-SR4
MODULE_100GBASE_ER4

100GBASE-ER4
MODULE_100G_CWDM4_FEC

100G-CWDM4-FEC
MODULE_100G_CWDM4_NO_FEC

100G-CWDM4-NO FEC
MODULE_100G_PSM4

100G-PSM4
MODULE_100G_CLR4

100G-CLR4
MODULE_IEEE80211_AC_2_5G

IEEE802.11AC 2.5G
MODULE_FC_16G

MODULE FC 16G.
MODULE_FC_32G

MODULE FC 32G.
MODULE_25GBASE_SR

MODULE 25G BASE SR.
MODULE_25GBASE_LR

MODULE 25G BASE LR.
MODULE_25GBASE_ER

MODULE 25G BASE ER.
MODULE_25GBASE_CR_CA_L

MODULE 25G BASE CR CA-L.
MODULE_25GBASE_CR_CA_S

MODULE 25G BASE CR CA-S.
MODULE_25GBASE_CR_CA_N

MODULE 25G BASE CR CA-N.
MODULE_400GBASE_SR16

400GBASE-SR16
MODULE_400GBASE_DR4

400GBASE-DR4
MODULE_400GBASE_FR8

400GBASE-FR8
MODULE_400GBASE_LR8

400GBASE-LR8
MODULE_40GBASE_AOC

40GBASE-AOC
MODULE_1000BASE_T1

1000BASE T1
MODULE_100BASE_T1

100BASE T1
MODULE_IEEE80211_AX

MODULE IEEE80211 AX
MODULE_50GBASE_CR

50GBASE-CR
MODULE_100GBASE_CR2

100GBASE-CR2
MODULE_200GBASE_CR4

200GBASE-CR4
MODULE_400GBASE_CR8

400GBASE-CR8
MODULE_FLEX_ETHERNET

Flexible Ethernet
MODULE_5GBASE_T

5GBASE T
MODULE_2500BASE_T

2500BASE T
MODULE_100BASE_T

100BASE T
MODULE_UNDEFINED

Undefined
MODULE_CUSTOM

Custom
MODULE_XAUI

XAUI
MODULE_XFI

XFI
MODULE_SFI

SFI
MODULE_25GAUI_C2M

25GAUI C2M
MODULE_XLAUI_C2M

XLAUI C2M
MODULE_XLPPI

XLPPI
MODULE_LAUI_2_C2M

LAUI-2 C2M
MODULE_50GAUI_2_C2M

50GAUI-2 C2M
MODULE_50GAUI_1_C2M

50GAUI-1 C2M
MODULE_CAUI_4_C2M

CAUI-4 C2M
MODULE_CAUI_4_C2M_NO_FEC

CAUI-4 C2M without FEC
MODULE_CAUI_4_C2M_RS

CAUI-4 C2M with RSFEC
MODULE_100GAUI_4_C2M

100GAUI-4 C2M
MODULE_100GAUI_2_C2M

100GAUI-2 C2M
MODULE_200GAUI_8_C2M

200GAUI-8 C2M
MODULE_200GAUI_4_C2M

200GAUI-4 C2M
MODULE_400GAUI_16_C2M

400GAUI-16 C2M
MODULE_400GAUI_8_C2M

400GAUI-8 C2M
MODULE_RESERVED

Reserved
MODULE_50GBASE_CR2_RS

50GBASE-CR2 with RS
MODULE_50GBASE_CR2_BASE_R

50GBASE-CR2 with BASE-R
MODULE_50GBASE_CR2_NO_FEC

50GBASE-CR2 with no FEC
MODULE_400G_CR8

400G CR8
MODULE_25GBASE_T

25GBASE-T
MODULE_40GBASE_T

40GBASE-T
MODULE_50GBASE_T

50GBASE-T
MODULE_40GE_SWDM4

40GE SWDM4
MODULE_40GE_BIDI

40GE BiDi
MODULE_50GBASE_SR

50GBASE SR
MODULE_100GE_SWDM4

100GE SWDM4
MODULE_100GE_BIDI

100GE BiDi
MODULE_100GBASE_SR2

100GBASE-SR2
MODULE_100G_SR

100G-SR
MODULE_200GBASE_SR4

200GBASE-SR4
MODULE_400GBASE_SR8

400GBASE-SR8
MODULE_400G_SR4

400G-SR4
MODULE_800G_SR8

800G-SR8
MODULE_400GBASE_SR4_2

400GBASE-SR4.2
MODULE_10G_ZW

10G-ZW
MODULE_10G_ZR

10G-ZR
MODULE_40GBASE_FR

40GBASE-FR
MODULE_50GBASE_FR

50GBASE-FR
MODULE_50GBASE_LR

50GBASE-LR
MODULE_50GBASE_ER

50GBASE-ER
MODULE_100G_CWDM4_OCP

100G CWDM4-OCP
MODULE_100G_CWDM4

100G CWDM4
MODULE_100G_4WDM_10

100G 4WDM-10
MODULE_100G_4WDM_20

100G 4WDM-20
MODULE_100G_4WDM_40

100G 4WDM-40
MODULE_100GBASE_DR

100GBASE-DR
MODULE_100GBASE_FR1

100GBASE-FR1
MODULE_100GBASE_LR1

100GBASE-LR1
MODULE_200GBASE_DR4

200GBASE-DR4
MODULE_200GBASE_FR4

200GBASE-FR4
MODULE_200GBASE_ER4

200GBASE-ER4
MODULE_400GBASE_ER8

400GBASE-ER8
MODULE_400GBASE_FR4

400GBASE-FR4
MODULE_400GBASE_LR4_6

400GBASE-LR4-6
MODULE_400G_LR4_10

400G-LR4-10
MODULE_PASSIVE_COPPER

Passive Copper
MODULE_PASSIVE_LOOPBACK

Passive Loopback
MODULE_ACTIVE_CABLE_CODE1

Active cable assembly with BER less than 10e-12
MODULE_ACTIVE_CABLE_CODE2

Active cable assembly with BER less than 5x10e-5
MODULE_ACTIVE_CABLE_CODE3

Active cable assembly with BER less than 2.6x10e-4
MODULE_ACTIVE_CABLE_CODE4

Active cable assembly with BER less than 10e-6
MODULE_ACTIVE_LOOPBACK

Active Loopback
MODULE_OTHER

Other
MODULE_G959_1_P1I1_2D1

G959.1 profile P1I1-2D1
MODULE_G959_1_P1S1_2D2

G959.1 profile P1S1-2D2
MODULE_G959_1_P1L1_2D2

G959.1 profile P1L1-2D2
MODULE_100G_WDM

100G WDM
MODULE_ACTIVE_COPPER1

Active Copper PAM4 C2M worst BER 10e-6 or below
MODULE_ACTIVE_OPTICAL1

Active Optical PAM4 C2M worst BER 10e-6 or below
MODULE_ACTIVE_COPPER2

Active Copper PAM4 C2M worst BER 10e-5 or below
MODULE_ACTIVE_OPTICAL2

Active Optical PAM4 C2M worst BER 10e-5 or below
MODULE_200G_PSM4

200G PSM4
TransceiverTypeList

Displays a list of all transceiver types available on the connected hardware.

Type: string

Default: "" (empty string)

VendorName

Vendor name.

Type: string

Default: N/A
VendorPartNumber

Vendor part number.

Type: string

Default: N/A
VendorSerialNumber

Vendor serial number.

Type: string

Default: N/A
XSLicenses

XS Licenses.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Unknown.

SPEED_10M

10 MBPS.
SPEED_100M

100 MBPS.
SPEED_1G

1 GBPS.
SPEED_10G

10 GBPS.
SPEED_40G

40 GBPS.
SPEED_100G

100 GBPS.
SPEED_25G

25 GBPS.
SPEED_2500M

2500 MBPS.
SPEED_5G

5 GBPS.
SPEED_50G

50 GBPS.
SPEED_400G

400 GBPS.
SPEED_200G

200 GBPS.
SPEED_800G

Speed 800G.