Description:
Specifies RoCEv2 wizard port parameters configuration.
Parents: Rocev2ConfigGenParams, Rocev2DeviceGenParams
Automatically created from: Rocev2ServerConfigGenParams
Relations:
| Side name (Type) |
Relative | Description |
|---|---|---|
| AffiliatedPort (AffiliationPort) |
Specifies the relation of the port that is Affiliated to |
| Attribute | Description | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||||||||||||
| AdditiveIncreaseRateInMbps |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the Mbps rate increase step to raise the target rate in each stage of the additive increase phase. Type: double Default: 5.0 Range: 1 - 100000 |
||||||||||||||||||
| AiSteps |
Indicates the max number of the additive increase steps to increase the rate to the maximum rate for the queue pair. Type: u8 Default: 8 Range: 1 - 8 |
||||||||||||||||||
| AiTimerInMs |
Indicates the additive increase timer in milliseconds for the queue pair. Type: double Default: 0.055 Range: 0 - 21990 |
||||||||||||||||||
| Alpha |
Determines the aggressiveness of the initial rate drop for the queue pair. Type: double Default: 1.0 Range: 0.001 - 1.999 |
||||||||||||||||||
| AlphaUpdatePeriodInMs |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the alpha timer update period in milliseconds for the DCQCN based automatic rate adjustment. Usually the alpha update period should be longer than the CNP generation interval. Type: double Default: 1.55 Range: 0 - 21990 |
||||||||||||||||||
| ByteResetInMb |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the number of frame megabytes sent since the last rate reduction was initiated. When this threshold is met, a new rate increase event is initiated. Type: u32 Default: 2 Range: 1 - 4294 |
||||||||||||||||||
| CnpGenerationInterval |
The interval time at which the CNP should generate(ms) Type: double Default: 0.05 Range: 0 - 10700 |
||||||||||||||||||
| CnpPriorityMode |
Priority mode for CNP Type: enum Default: L2_PCP Possible Values:
|
||||||||||||||||||
| DcqcnProfileName |
Indicates the DCQCN profile name. Type: string Default: Default Range: 1 - 128 characters |
||||||||||||||||||
| EnableAi |
Enable or disable the additive rate increase for the queue pair. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||
| EnableAutoRateAdjust |
Enable or disable the DCQCN based automatic rate adjustment. Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||
| EnableEcnCnp |
Enable/Disable ECN on RoCEv2 server Type: bool Default: TRUE Possible Values:
|
||||||||||||||||||
| EnablePfc |
Enable/Disable PFC on RoCEv2 server Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||
| EnableUserDefinedAlphaUpdatePeriod |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Enable or disable the user defined alpha update period. Type: bool Default: FALSE Possible Values:
|
||||||||||||||||||
| FrTimerInMs |
Indicates the fast recovery timer in milliseconds for the queue pair. Type: double Default: 0.055 Range: 0 - 21990 |
||||||||||||||||||
| HyperIncreaseRateInMbps |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the Mbps rate increase step to raise the target rate in each stage of the hyper increase phase. Type: double Default: 40.0 Range: 1 - 100000 |
||||||||||||||||||
| IpEcnValue |
Early Congestion Notification value in IP Header Type: enum Default: ECT_1 Possible Values:
|
||||||||||||||||||
| L2PcpPriorityValue |
L2 PCP Priority value for CNP Type: u8 Default: 0 Range: 0 - 7 |
||||||||||||||||||
| L3DscpPriorityValue |
L3 DSCP Priority value for CNP Type: u8 Default: 0 Range: 0 - 63 |
||||||||||||||||||
| MaxRateInPercent |
Indicates the maximal percent rate limit for the queue pair. Type: double Default: 10.0 Range: 0.0000001 - 100.0 |
||||||||||||||||||
| MinAlpha |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the minimum alpha value can be reduced to by the alpha update process. Type: double Default: 0.001 Range: 0.001 - 1 |
||||||||||||||||||
| MinRateInMbps |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the minimal Mbps rate limit for the queue pair. Type: double Default: 2.0 Range: 1 - 100000 |
||||||||||||||||||
| MinRateInPercent |
Indicates the minimal percent rate limit for the queue pair. Type: double Default: 0.0001 Range: 0.0000001 - 100.0 |
||||||||||||||||||
| PhaseThreshold |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the stage threshold of rate increase events for moving to the next rate increase phase of recovery (Additive Increase or Hyper Increase). Type: u8 Default: 5 Range: 2 - 31 |
||||||||||||||||||
| PriorityQueue |
Priority Queues for PFC Type: enum Default: PRIORITY_0 Possible Values:
|
||||||||||||||||||
| TimeResetInMs |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Indicates the interval of time in milliseconds since the last rate reduction was initiated. When this timer expires, a new rate increase event is initiated. Type: double Default: 0.055 Range: 0 - 21990 |
There are no read-only attributes.