Description:
Specifies RoCEv2 wizard Device parameters configuration.
Automatically created from: Rocev2GenPortParams
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||
EnableVlan |
Enable VLAN on RoCEv2 server. Type: bool Default: TRUE Possible Values:
|
||||||
FrameSize |
Size of frame. Type: u16 Default: 94 Range: 90 - 16383 |
||||||
GwIpv4Addr |
Gateway IPv4 address of RoCEv2 server. Type: ip Default: 192.168.100.1 |
||||||
GwIpv4AddrStep |
Gateway IPv4 address step of RoCEv2 server. Type: ip Default: 0.0.0.1 |
||||||
IpDscpValue |
DSCP value in IP header Type: u8 Default: 0 Range: 0 - 63 |
||||||
Ipv4Addr |
IPv4 address of RoCEv2 server. Type: ip Default: 192.168.100.2 |
||||||
Ipv4AddrStep |
IPv4 address step of RoCEv2 server. Type: ip Default: 0.0.0.1 |
||||||
MacAddr |
Source MAC address of RoCEv2 server. Type: mac Default: 00:10:94:00:00:01 |
||||||
MacAddrStep |
Source MAC address step of RoCEv2 server. Type: mac Default: 00:00:00:00:00:01 |
||||||
QpBlockCount |
Indicates the number of queue pair blocks to be configured. Type: u16 Default: 1 Range: 1 - 65535 |
||||||
QpsPerBlockCount |
Indicates the number of queues per block to be configured. Type: u16 Default: 1 Range: 1 - 65535 |
||||||
QpStepPerServer |
Indicates the queue pair identifier step per server. Type: u16 Default: 1 Range: 1 - 65535 |
||||||
ServerBlockSize |
Indicates the harddisk block size in kilobits of the RoCEv2 server. Type: u16 Default: 4 Range: 1 - 64 |
||||||
ServerBlockSizeStep |
Indicates the harddisk block size step in kilobits per RoCEv2 server. Type: u16 Default: 2 Range: 0 - 64 |
||||||
ServerDeviceCount |
Number of servers required per port Type: u8 Default: 1 Range: 1 - 8 |
||||||
StartQp |
Indicates the start queue pair identifier. Type: u32 Default: 100 Range: 0 - 16777215 |
||||||
StartUdpSrcPort |
Start UDP source port number for RoCEv2 packets. Type: u16 Default: 1024 |
||||||
StartVlanId |
Start VLAN ID for RoCEv2 packets. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
UdpSrcPortStep |
Indicates the UDP Source Port step across Queue Pairs. Type: u16 Default: 0 Range: 0 - 32767 |
||||||
VlanIdStep |
VLAN ID step for RoCEv2 packets. Type: u16 Default: 1 Range: 0 - 4095 |
||||||
VlanPriority |
VLAN Priority to be set in ethernet header Type: u8 Default: 0 Range: 0 - 7 |
There are no read-only attributes.