Settings for ports in with their physical interface in ATM mode.
| Attribute |
Description |
|
Common Writable Attributes
|
Active, Name
|
|
CustomFecMode
|
Set to configure the custom Fec mode on the port.
Type: enum
Default: KR_FEC
Possible Values:
| Value |
Description |
| NONE |
No custom FEC mode.
|
| KR_FEC |
KR FEC mode.
|
| RS_FEC |
RS FEC mode.
|
| KP4_FEC |
KP4 FEC mode.
|
|
|
DataPathMode
|
Sets the path for the port to transmit data.
Type: enum
Default: NORMAL
Possible Values:
| Value |
Description |
| NORMAL |
Port will transmit normally.
|
| LOCAL_LOOPBACK |
Port will transmit in a loopback mode, so transmitted data will be
received by the transmitting port without going out on the
wire.
|
| LINE_MONITOR |
Port will be placed in line monitor mode. All received packets will
be transmitted as is but can also be captured on the port.
|
|
|
ForwardErrorCorrection
|
Forward error correction(FEC).
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
HecCosetEnable
|
Enable/disable HEC coset.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
Enable
|
| FALSE |
Disable
|
|
|
HecRxCorrectionEnable
|
Enable receive HEC correction.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
Enable
|
| FALSE |
Disable
|
|
|
IgnoreLinkStatus
|
Allow the port to continue transmitting traffic if the link(s) with its peer port(s) goes down. NOTE: Feature availability depends on module/card type.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
Mtu
|
Maximum transmission unit.
Type: u32
Default: 1500
Range: 0 - 16383
|
|
PassBadRxHecEnable
|
Enable pass bad receive HEC.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
Enable
|
| FALSE |
Disable
|
|
|
PortSetupMode
|
Exclusively configures port setup or hardware register
parameters.
Type: enum
Default: PORTCONFIG_ONLY
Possible Values:
| Value |
Description |
| PORTCONFIG_ONLY |
Only setup port setup parameters.
|
| REGISTERS_ONLY |
Only setup hardware register parameters (MII or
MDIO).
|
|
| Read-Only Attribute |
Description |
|
AdvertisementType
|
Advertisement Type.
Type: enum
Default: IEEE
Possible Values:
| Value |
Description |
| NA |
Not Applicable.
|
| IEEE |
IEEE.
|
| NBASET |
NBASE-T.
|
|
|
AutoNegotiationStatus
|
Auto negotiation status.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
|
State of the custom FEC mode of this port.
Type: enum
Default: NONE
Possible Values:
| Value |
Description |
| NONE |
No custom FEC mode.
|
| KR_FEC |
KR FEC mode.
|
| RS_FEC |
RS FEC mode.
|
| KP4_FEC |
KP4 FEC mode.
|
|
|
CustomFecModeStatus
|
Custom Fec mode status.
Type: string
Default: None
|
|
CustomFecTypeStatus
|
Custom Fec type status.
Type: string
Default: None
|
|
ForwardErrorCorrectionStatus
|
Forward error correction status.
Type: bool
Default: TRUE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
IsEnforceMtuOnRxSupported
|
Enforce MTU for RX control support.
Type: bool
Default: FALSE
Possible Values:
| Value |
Description |
| TRUE |
True.
|
| FALSE |
False.
|
|
|
LinkStatus
|
Link status.
Type: enum
Default: NONE
Possible Values:
| Value |
Description |
| DOWN |
Link is down.
|
| UP |
Link is up.
|
| ERROR |
Link has error.
|
| ADMIN_DOWN |
Link is administratively down.
|
| UP_SW_DISABLED |
The link is up, but is disabled by software.
|
| SONET |
Link is SONET.
|
| NONE |
No link present.
|
|
|
ModuleFwVersion
|
Module firmware version.
Type: string
Default: N/A
|
|
ModuleHwVersion
|
Module hardware version.
Type: string
Default: N/A
|
|
ModuleType
|
Module type plugs into the PersonalityCardType.
Type: enum
Default: NA
Possible Values:
| Value |
Description |
| NA |
Hot-plugging module is not supported.
|
| UNKNOWN |
A module has been plugged in but cannot be
identified.
|
| ABSENT |
No module plugged in.
|
| SFP_FIBER |
SFP fiber media.
|
| SFP_Copper |
SFP copper media.
|
| XFP |
XFP
|
| XENPAK |
Xenpak
|
| X2 |
X2
|
| E1000 |
E1000
|
| TEN_GBASE_T |
10GBASE-T
|
| SFP_PLUS |
SFP Plus
|
| CFP |
CFP
|
| QSFP_PLUS |
QSFP Plus
|
| CXP |
CXP
|
| CFP2 |
CFP2
|
| CFP4 |
CFP4
|
| QSFP28 |
QSFP28
|
| IEEE80211 |
IEEE 802.11
|
| SFP28 |
SFP28
|
| CFP8 |
CFP8
|
| QSFPDD |
QSFPDD
|
| OSFP |
OSFP
|
| FLEXE |
FLEXE
|
| QSFP56 |
QSFP56
|
| QSFP_PLUS_CMIS |
QSFP Plus CMIS
|
|
|
PersonalityCardType
|
Personality card type. This is the plugin module to the host
card.
Type: enum
Default: NA
Possible Values:
| Value |
Description |
| NA |
Hot-plugging personality card is not supported.
|
| UNKNOWN |
A personality card has been plugged in but cannot be
identified.
|
| ABSENT |
No personality card plugged in.
|
| SFP |
SFP
|
| XFP |
XFP
|
| XENPAK |
Xenpak
|
| X2 |
X2
|
| TEN_GBASE_T |
10GBASE-T
|
| CFP |
CFP
|
| CFP_QSFP |
CFP QSFP
|
| CFP_CXP |
CFP CXP
|
| CFP2 |
CFP2
|
| CFP2_CXP |
CFP2 CXP
|
| CFP2_CFP4 |
CFP2 CFP4
|
| CFP2_QSFP28 |
CFP2 QSFP28
|
| CFP4 |
CFP4
|
| QSFP28 |
QSFP28
|
| IEEE80211 |
IEEE 802.11
|
| SFP28 |
SFP28
|
| CFP8 |
CFP8
|
| QSFP_PLUS |
QSFP_PLUS
|
| QSFPDD |
QSFPDD
|
| OSFP |
OSFP
|
| QSFP56 |
QSFP56
|
| QSFP_PLUS_CMIS |
QSFP_PLUS_CMIS
|
|
|
QualifiedState
|
Qualified state.
Type: enum
Default: UNVERIFIED
Possible Values:
| Value |
Description |
| UNVERIFIED |
Unverified
|
| QUALIFIED |
Qualified
|
| KNOWN_WORKING |
Known working
|
|
|
TransceiverType
|
Displays the first transceiver type presented by the
hardware.
Type: enum
Default: MODULE_NONE
Possible Values:
| Value |
Description |
| MODULE_NONE |
None
|
| MODULE_10GBASE_ER |
10GBASE-ER
|
| MODULE_10GBASE_LR |
10GBASE-LR
|
| MODULE_10GBASE_SR |
10GBASE-SR
|
| MODULE_10GBASE_EW |
10GBASE-EW
|
| MODULE_10GBASE_LW |
10GBASE-LW
|
| MODULE_10GBASE_SW |
10GBASE-SW
|
| MODULE_10GBASE_CX4 |
10GBASE-CX4
|
| MODULE_10GBASE_LX4 |
10GBASE-LX4
|
| SPIRENT_10GBASE_CX4 |
Spirent 10GBASE-CX4
|
| MODULE_OC48_LR |
OC48-LR
|
| MODULE_OC48_IR |
OC48-IR
|
| MODULE_OC48_SR |
OC48-SR
|
| MODULE_OC12_LR |
OC12-LR
|
| MODULE_OC12_IR |
OC12-IR
|
| MODULE_OC12_SR |
OC12-SR
|
| MODULE_OC3_LR |
OC3-LR
|
| MODULE_OC3_IR |
OC3-IR
|
| MODULE_OC3_SR |
OC3-SR
|
| MODULE_OC192_LR |
OC192-LR
|
| MODULE_OC192_IR |
OC192-IR
|
| MODULE_OC192_SR |
OC192-SR
|
| MODULE_OC192_VR |
OC192-SR
|
| MODULE_10GBASE_T |
10GBASE-T
|
| MODULE_XFP_CX4 |
XFP-CX4
|
| MODULE_XFP_E |
XFP-E
|
| MODULE_1000BASE_T |
1000BASE-T
|
| MODULE_1000BASE_CX |
1000BASE-CX
|
| MODULE_1000BASE_LX |
1000BASE-LX
|
| MODULE_1000BASE_SX |
1000BASE-SX
|
| MODULE_40GBASE_LR |
40GBASE-LR
|
| MODULE_40GBASE_SR |
40GBASE-SR
|
| MODULE_40GBASE_CR4 |
40GBASE-CR4
|
| MODULE_40GBASE_SR4 |
40GBASE-SR4
|
| MODULE_40GBASE_LR4 |
40GBASE-LR4
|
| MODULE_100GBASE_LR |
100GBASE-LR
|
| MODULE_100GBASE_SR |
100GBASE-SR
|
| MODULE_100GBASE_SR10 |
100GBASE-SR10
|
| MODULE_100GBASE_CR10 |
100GBASE-CR10
|
| MODULE_100GBASE_LR4 |
100GBASE-LR4
|
| MODULE_FC_2G |
FC-2G
|
| MODULE_FC_4G |
FC-4G
|
| MODULE_FC_8G |
FC-8G
|
| MODULE_FC_10G |
FC-10G
|
| MODULE_100BASE_FX |
100BASE-FX
|
| MODULE_SFP_PLUS_COPPER |
SFP Plus Copper
|
| MODULE_QSFP_ALPHA_BETA |
QSFP Alpha Beta
|
| MODULE_SFP_100BASE_LX |
SFP 100BASE-LX
|
| MODULE_SFP_GBE_BASE_BX10 |
SFP GBEBASE-BX10
|
| MODULE_SFP_GBE_BASE_PX |
SFP GBEBASE-PX
|
| MODULE_CXP_ALPHA_BETA |
CXP Alpha Beta
|
| MODULE_100GBASE_CR4 |
100GBASE-CR4
|
| MODULE_100GBASE_SR4 |
100GBASE-SR4
|
| MODULE_100GBASE_AOC |
100GBASE-AOC
|
| MODULE_IEEE80211_N |
IEEE802.11 N
|
| MODULE_IEEE80211_AC |
IEEE802.11 AC
|
| MODULE_25GBASE_CR4 |
25GBASE-CR4
|
| MODULE_25GBASE_SR4 |
25GBASE-SR4
|
| MODULE_100GBASE_ER4 |
100GBASE-ER4
|
| MODULE_100G_CWDM4_FEC |
100G-CWDM4-FEC
|
| MODULE_100G_CWDM4_NO_FEC |
100G-CWDM4-NO FEC
|
| MODULE_100G_PSM4 |
100G-PSM4
|
| MODULE_100G_CLR4 |
100G-CLR4
|
| MODULE_IEEE80211_AC_2_5G |
IEEE802.11AC 2.5G
|
| MODULE_FC_16G |
MODULE FC 16G.
|
| MODULE_FC_32G |
MODULE FC 32G.
|
| MODULE_25GBASE_SR |
MODULE 25G BASE SR.
|
| MODULE_25GBASE_LR |
MODULE 25G BASE LR.
|
| MODULE_25GBASE_ER |
MODULE 25G BASE ER.
|
| MODULE_25GBASE_CR_CA_L |
MODULE 25G BASE CR CA-L.
|
| MODULE_25GBASE_CR_CA_S |
MODULE 25G BASE CR CA-S.
|
| MODULE_25GBASE_CR_CA_N |
MODULE 25G BASE CR CA-N.
|
| MODULE_400GBASE_SR16 |
400GBASE-SR16
|
| MODULE_400GBASE_DR4 |
400GBASE-DR4
|
| MODULE_400GBASE_FR8 |
400GBASE-FR8
|
| MODULE_400GBASE_LR8 |
400GBASE-LR8
|
| MODULE_40GBASE_AOC |
40GBASE-AOC
|
| MODULE_1000BASE_T1 |
1000BASE T1
|
| MODULE_100BASE_T1 |
100BASE T1
|
| MODULE_IEEE80211_AX |
MODULE IEEE80211 AX
|
| MODULE_50GBASE_CR |
50GBASE-CR
|
| MODULE_100GBASE_CR2 |
100GBASE-CR2
|
| MODULE_200GBASE_CR4 |
200GBASE-CR4
|
| MODULE_400GBASE_CR8 |
400GBASE-CR8
|
| MODULE_FLEX_ETHERNET |
Flexible Ethernet
|
| MODULE_5GBASE_T |
5GBASE T
|
| MODULE_2500BASE_T |
2500BASE T
|
| MODULE_100BASE_T |
100BASE T
|
| MODULE_UNDEFINED |
Undefined
|
| MODULE_CUSTOM |
Custom
|
| MODULE_XAUI |
XAUI
|
| MODULE_XFI |
XFI
|
| MODULE_SFI |
SFI
|
| MODULE_25GAUI_C2M |
25GAUI C2M
|
| MODULE_XLAUI_C2M |
XLAUI C2M
|
| MODULE_XLPPI |
XLPPI
|
| MODULE_LAUI_2_C2M |
LAUI-2 C2M
|
| MODULE_50GAUI_2_C2M |
50GAUI-2 C2M
|
| MODULE_50GAUI_1_C2M |
50GAUI-1 C2M
|
| MODULE_CAUI_4_C2M |
CAUI-4 C2M
|
| MODULE_CAUI_4_C2M_NO_FEC |
CAUI-4 C2M without FEC
|
| MODULE_CAUI_4_C2M_RS |
CAUI-4 C2M with RSFEC
|
| MODULE_100GAUI_4_C2M |
100GAUI-4 C2M
|
| MODULE_100GAUI_2_C2M |
100GAUI-2 C2M
|
| MODULE_200GAUI_8_C2M |
200GAUI-8 C2M
|
| MODULE_200GAUI_4_C2M |
200GAUI-4 C2M
|
| MODULE_400GAUI_16_C2M |
400GAUI-16 C2M
|
| MODULE_400GAUI_8_C2M |
400GAUI-8 C2M
|
| MODULE_RESERVED |
Reserved
|
| MODULE_50GBASE_CR2_RS |
50GBASE-CR2 with RS
|
| MODULE_50GBASE_CR2_BASE_R |
50GBASE-CR2 with BASE-R
|
| MODULE_50GBASE_CR2_NO_FEC |
50GBASE-CR2 with no FEC
|
| MODULE_400G_CR8 |
400G CR8
|
| MODULE_25GBASE_T |
25GBASE-T
|
| MODULE_40GBASE_T |
40GBASE-T
|
| MODULE_50GBASE_T |
50GBASE-T
|
| MODULE_40GE_SWDM4 |
40GE SWDM4
|
| MODULE_40GE_BIDI |
40GE BiDi
|
| MODULE_50GBASE_SR |
50GBASE SR
|
| MODULE_100GE_SWDM4 |
100GE SWDM4
|
| MODULE_100GE_BIDI |
100GE BiDi
|
| MODULE_100GBASE_SR2 |
100GBASE-SR2
|
| MODULE_100G_SR |
100G-SR
|
| MODULE_200GBASE_SR4 |
200GBASE-SR4
|
| MODULE_400GBASE_SR8 |
400GBASE-SR8
|
| MODULE_400G_SR4 |
400G-SR4
|
| MODULE_800G_SR8 |
800G-SR8
|
| MODULE_400GBASE_SR4_2 |
400GBASE-SR4.2
|
| MODULE_10G_ZW |
10G-ZW
|
| MODULE_10G_ZR |
10G-ZR
|
| MODULE_40GBASE_FR |
40GBASE-FR
|
| MODULE_50GBASE_FR |
50GBASE-FR
|
| MODULE_50GBASE_LR |
50GBASE-LR
|
| MODULE_50GBASE_ER |
50GBASE-ER
|
| MODULE_100G_CWDM4_OCP |
100G CWDM4-OCP
|
| MODULE_100G_CWDM4 |
100G CWDM4
|
| MODULE_100G_4WDM_10 |
100G 4WDM-10
|
| MODULE_100G_4WDM_20 |
100G 4WDM-20
|
| MODULE_100G_4WDM_40 |
100G 4WDM-40
|
| MODULE_100GBASE_DR |
100GBASE-DR
|
| MODULE_100GBASE_FR1 |
100GBASE-FR1
|
| MODULE_100GBASE_LR1 |
100GBASE-LR1
|
| MODULE_200GBASE_DR4 |
200GBASE-DR4
|
| MODULE_200GBASE_FR4 |
200GBASE-FR4
|
| MODULE_200GBASE_ER4 |
200GBASE-ER4
|
| MODULE_400GBASE_ER8 |
400GBASE-ER8
|
| MODULE_400GBASE_FR4 |
400GBASE-FR4
|
| MODULE_400GBASE_LR4_6 |
400GBASE-LR4-6
|
| MODULE_400G_LR4_10 |
400G-LR4-10
|
| MODULE_PASSIVE_COPPER |
Passive Copper
|
| MODULE_PASSIVE_LOOPBACK |
Passive Loopback
|
| MODULE_ACTIVE_CABLE_CODE1 |
Active cable assembly with BER less than 10e-12
|
| MODULE_ACTIVE_CABLE_CODE2 |
Active cable assembly with BER less than 5x10e-5
|
| MODULE_ACTIVE_CABLE_CODE3 |
Active cable assembly with BER less than 2.6x10e-4
|
| MODULE_ACTIVE_CABLE_CODE4 |
Active cable assembly with BER less than 10e-6
|
| MODULE_ACTIVE_LOOPBACK |
Active Loopback
|
| MODULE_OTHER |
Other
|
| MODULE_G959_1_P1I1_2D1 |
G959.1 profile P1I1-2D1
|
| MODULE_G959_1_P1S1_2D2 |
G959.1 profile P1S1-2D2
|
| MODULE_G959_1_P1L1_2D2 |
G959.1 profile P1L1-2D2
|
| MODULE_100G_WDM |
100G WDM
|
| MODULE_ACTIVE_COPPER1 |
Active Copper PAM4 C2M worst BER 10e-6 or below
|
| MODULE_ACTIVE_OPTICAL1 |
Active Optical PAM4 C2M worst BER 10e-6 or below
|
| MODULE_ACTIVE_COPPER2 |
Active Copper PAM4 C2M worst BER 10e-5 or below
|
| MODULE_ACTIVE_OPTICAL2 |
Active Optical PAM4 C2M worst BER 10e-5 or below
|
| MODULE_200G_PSM4 |
200G PSM4
|
|
|
TransceiverTypeList
|
Displays a list of all transceiver types available on the connected
hardware.
Type: string
Default: "" (empty string)
|
|
VendorName
|
Vendor name.
Type: string
Default: N/A
|
|
VendorPartNumber
|
Vendor part number.
Type: string
Default: N/A
|
|
VendorSerialNumber
|
Vendor serial number.
Type: string
Default: N/A
|