Description:
Controls for the continuous interface path error injector triggers for the interface.
Automatically created from: AtmPhy, POSPhy
| Attribute | Description |
|---|---|
| Common Writable Attributes | Active, Name |
| Read-Only Attribute | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| PathAis |
Triggers the injection of a path AIS alarm, which inserts 0xFF into pointer bytes H1, H2, and H3 and Synchronous Payload Envelope bytes for a particular path. Type: enum Default: OFF Possible Values:
|
||||||||
| PathB3 |
Triggers the injection of bit errors in the B3 byte value. Type: enum Default: OFF Possible Values:
|
||||||||
| PathLop |
Triggers the injection of a path Loss of Pointer (LOP) alarm. A LOP alarm is triggered when invalid pointers are found in 8 consecutive frames or if 8 consecutive new data flags (NDF) are received. Type: enum Default: OFF Possible Values:
|
||||||||
| PathPlm |
Triggers the injection of a path Payload Label Mismatch (PLM) alarm. A PLM alarm is triggered when the observed C2 signal label value does not match that of the expected signal label value. Type: enum Default: OFF Possible Values:
|
||||||||
| PathRdi |
Triggers the injection of a path RDI alarm. A path RDI alarm is triggered upon detecting a loss of signal, loss of frame, or AIS defect. Type: enum Default: OFF Possible Values:
|
||||||||
| PathRei |
Triggers the injection of a path REI alarm. A path REI alarm is triggered when B3 BIP-8 errors are detected at the far end device. Type: enum Default: OFF Possible Values:
|
||||||||
| PathUnequipped |
Triggers the injection of a path Unequipped alarm. A path Unequipped alarm is triggered when C2 signal label value is 0x00. Type: enum Default: OFF Possible Values:
|