Description:
Controls for the continuous interface section/line error injector triggers for the interface.
Automatically created from: AtmPhy, POSPhy
| Attribute | Description |
|---|---|
| Common Writable Attributes | Active, Name |
| Read-Only Attribute | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| LineAis |
Triggers the injection of the Alarm Indication Signal (AIS) alarm, which inserts 0xFF into all bytes, except the section overhead. Type: enum Default: OFF Possible Values:
|
||||||||
| LineB2 |
Triggers the injection of bit errors in the B2 byte value. Type: enum Default: OFF Possible Values:
|
||||||||
| LineRdi |
Triggers the injection of the Remote Defect Indication (RDI) alarm, by inserting 110 in bits 6, 7, and 8 of the K2 byte. Type: enum Default: OFF Possible Values:
|
||||||||
| LineRei |
Triggers the injection of the Remote Error Indication (REI) alarm, by inserting an REI count of 1 in the M1 byte. Type: enum Default: OFF Possible Values:
|
||||||||
| SectionB1 |
Triggers the injection of bit errors in the B1 byte value. Type: enum Default: OFF Possible Values:
|
||||||||
| SectionLof |
A severely errored frame condition is triggered to produce a loss of frame (LOF) condition. Type: enum Default: OFF Possible Values:
|
||||||||
| SectionLos |
Triggers the injection of continuous zeros in the incoming data stream to trigger a loss of signal (LOS) condition. Type: enum Default: OFF Possible Values:
|