VdpConfigGenPortParams Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Configures the VEPA wizard port parameters.

Parents: VdpConfigGenParams, VdpConfigGenStationParams

Relations:

Side name
(Type)		 Relative Description
AffiliatedPort
(AffiliationPort)

Port

Spirent TestCenter port affiliated with this config object.

VdpConfigGenPortParams Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
DeviceMode

Whether the VDP device is emulating a station or a bridge (not supported).

Type: enum

Default: STATION

Possible Values:

Value Description
STATION

Device will emulate a VEPA station.
EnableSChannels

Whether to enable S-component.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

S-component is enabled.
FALSE

S-component is not enabled.
MacAddr

MAC address of the S-component device. NOTE: Applicable only if S-channels are enabled.

Type: mac

Default: 00:10:94:00:00:01
VdpDevicesPerPort

Number of EVB devices to create per port. NOTE: Applicable only if S-channels are enabled.

Type: u16

Default: 1

Range: 1 - 166

VdpConfigGenPortParams Read-Only Attributes

There are no read-only attributes.