Description:
Configuring the general port parameters for host devices under L3 Vni for Vxlan Evpn Overlay
Parents: VxlanEvpnOverlayConfigGenParams
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
AffiliatedPort (AffiliationPort) |
Configuring ports |
Attribute | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||||
AttachedVtepIpv4Addr |
Attached VTEP IPv4 Address for host. Type: ip Default: 192.85.100.1 |
||||||||||||
AttachedVtepIpv6Addr |
Attached VTEP IPv6 Address for host. Type: ipv6 Default: 5001::1 |
||||||||||||
EnableType5PrefixMatch |
Enable to match Type-5 Prefix for the host. Type: bool Default: FALSE Possible Values:
|
||||||||||||
EnableVlan |
Specifies the option of enabling VLAN Type: bool Default: FALSE Possible Values:
|
||||||||||||
GatewayIpAddress |
Configuring Gateway IP Address Type: ip Default: 192.85.100.1 |
||||||||||||
GatewayIpAddressStep |
Configuring Gateway IP Address Increment Type: ip Default: 0.0.0.1 |
||||||||||||
GatewayIpAddrStepPerSegment |
Configuring Gateway IP Address Increment Per Segment Block Type: ip Default: 0.1.0.0 |
||||||||||||
GatewayIpv6Address |
Configuring Gateway IPV6 Address Type: ipv6 Default: 5001::1 |
||||||||||||
GatewayIpv6AddressStep |
Configuring Gateway IPV6 Address Increment Type: ipv6 Default: 0::1 |
||||||||||||
GatewayIpv6AddrStepPerSegmentBlock |
Configuring Gateway IPV6 Address Increment Per Segment Block Type: ipv6 Default: ::1:0 |
||||||||||||
HostIpType |
Configuring the Ip type of host Type: enum Default: IPV4 Possible Values:
|
||||||||||||
HostPerSegment |
Configuring Hosts per Segment Type: u16 Default: 1 Range: 1 - 65535 |
||||||||||||
IncludeL2VniInMac |
To include L2 VNI value in mac address.This option is configurable only when "SplitSegmentConfigurationPerL2Vni" is enabled in segment configuration Type: bool Default: FALSE Possible Values:
|
||||||||||||
IpAddress |
Configuring IP Address Type: ip Default: 192.85.100.2 |
||||||||||||
IpAddressStep |
Configuring IP Address Increment Type: ip Default: 0.0.0.1 |
||||||||||||
IpAddrStepPerSegment |
Configuring IP Address Increment Per Segment Block Type: ip Default: 0.1.0.0 |
||||||||||||
IpPrefix |
Configuring IP Prefix Type: u8 Default: 24 Range: 0 - 32 |
||||||||||||
Ipv6Address |
Configuring IPv6 Address Type: ipv6 Default: 5001::2 |
||||||||||||
Ipv6AddressStep |
Configuring IP6 Address Increment Type: ipv6 Default: 0::1 |
||||||||||||
Ipv6AddrStepPerSegmentBlock |
Configuring IP6 Address Increment Per Segment Block Type: ipv6 Default: ::1:0 |
||||||||||||
Ipv6Prefix |
Configuring IPv6 Prefix Type: u32 Default: 64 Range: 0 - 128 |
||||||||||||
L2VniBytes |
Length of L2 vni to be used in mac address Type: enum Default: TWOBYTES Possible Values:
|
||||||||||||
MacAddress |
Configuring MAC Address Type: mac Default: 10:10:00:10:00:01 |
||||||||||||
MacAddressStep |
Configuring MAC Address Increment Type: mac Default: 00:00:00:00:00:01 |
||||||||||||
MacAddrStepPerSegment |
Configuring MAC Address Increment Per Segment Block Type: mac Default: 00:00:00:00:01:00 |
||||||||||||
Mask2Bytes |
Position where l2 vni will be placed in mac address Type: enum Default: MASK_FF_FF_00_00_00_00 Possible Values:
|
||||||||||||
Mask3Bytes |
Position where 3 bytes of l2 vni will be placed in mac address Type: enum Default: MASK_FF_FF_FF_00_00_00 Possible Values:
|
||||||||||||
OverrideAttachedVtepIp |
Enable to override attached VTEP IP for host. Type: bool Default: FALSE Possible Values:
|
||||||||||||
VlanId |
Specifies the option of configuring VLAN Id Type: u16 Default: 1 Range: 0 - 4095 |
||||||||||||
VlanIdStep |
Specifies the option of configuring VLAN Id Increment Type: u16 Default: 1 Range: 0 - 4095 |
There are no read-only attributes.