Description:
Lldp port configuaration
Automatically created from: Port
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| AdditionalFragmentSize |
Additional Fragment Size Type: u8 Default: 0 Range: 0 - 3 |
||||||
| DelayResponse |
After receiving specified number of verify packets, response packet shall be sent. This is to introduce delay in sending response packet Type: u32 Default: 1 |
||||||
| EnableResponse |
Response packets shall be sent if this flag is set to true on receiving verify packet Type: bool Default: FALSE Possible Values:
|
||||||
| EnableVerification |
Verify packets shall be sent if this flag along with PreEmptionCapabilitySupport and PreEmptionCapabilityStatus flags are set to true Type: bool Default: FALSE Possible Values:
|
||||||
| MalformPayload |
Enable to send malformed payload Type: bool Default: FALSE Possible Values:
|
||||||
| Mcrc |
Invalid mCRC value. Type: u32 Default: 0000 |
||||||
| McrcError |
Enable to send invalid mCRC in verify or response packet Type: bool Default: FALSE Possible Values:
|
||||||
| Payload |
Invalid payload. Type: u32 Default: 0000 |
||||||
| PayloadSize |
Invalid Payload size. Type: u16 Default: 60 Range: 60 - 1514 |
||||||
| PreEmptionCapabilityStatus |
Enable or disable Pre emption capability status Type: bool Default: FALSE Possible Values:
|
||||||
| PreEmptionCapabilitySupport |
Enable or disable preemption capability support, based on this AEC TLV shall be sent Type: bool Default: FALSE Possible Values:
|
||||||
| SendMalformResponse |
Send Malform Verify Type: bool Default: FALSE Possible Values:
|
||||||
| SendMalformVerify |
Send Malform Verify Type: bool Default: FALSE Possible Values:
|
||||||
| VerifyLimit |
Number of verify packets to be sent if no response received. Type: u32 Default: 3 |
||||||
| VerifyTimer |
A timer, of time from when a verification mPacket was sent, to initiating the next attempt. The timer expires verifyTime ms around 20 percent after being started. Type: u8 Default: 10 Range: 1 - 128 |
There are no read-only attributes.