Description:
Confugure Bgp Underlay Params
Parents: VxlanEvpnOverlayConfigGenParams
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
AffiliatedPort (AffiliationPort) |
Affiliation Port relation |
Attribute | Description | ||||||
---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||
AsByteMode |
Specifies the BGP Underlay AS byte mode to be configured. Type: enum Default: AS_2_BYTE Possible Values:
|
||||||
AsNum |
Specifies the BGP Underlay AS number to be configured. Type: u16 Default: 1 Range: 1 - 65535 |
||||||
AsNum4Byte |
Specifies the BGP Underlay AS 4-byte to be configured. Type: string Default: 1.1 |
||||||
AsNum4ByteStep |
Specifies the BGP Underlay AS 4-byte step to be configured. Type: string Default: 0 |
||||||
AsNumStep |
Specifies the BGP Underlay AS number step Ip Step to be configured. Type: u16 Default: 1 Range: 0 - 65535 |
||||||
BgpMode |
Specifies the BGP Underlay BGP mode to be configured. Type: enum Default: EBGP Possible Values:
|
||||||
BgpSessionIpAddress |
Specifies the BGP Underlay session IP address mode to be configured. Type: enum Default: INTERFACE_IP Possible Values:
|
||||||
DutAs |
Specifies the BGP Underlay DUT AS to be configured. Type: u16 Default: 1001 Range: 1 - 65535 |
||||||
DutAs4Byte |
Specifies the BGP Underlay DUT AS 4-Byte to be configured. Type: string Default: 1.1001 |
||||||
DutAsNum4ByteStep |
Specifies the BGP Underlay DUT AS 4-Byte step to be configured. Type: string Default: 0 |
||||||
DutAsStep |
Specifies the BGP Underlay DUT AS step to be configured. Type: u16 Default: 1 Range: 0 - 65535 |
||||||
DutIpAddr |
Specifies the BGP Underlay DUT IP address to be configured. Type: ip Default: 10.0.0.1 |
||||||
DutIpAddrStep |
Specifies the BGP Underlay DUT IP address step to be configured. Type: ip Default: 0.0.0.1 |
||||||
DutIpv6Addr |
Specifies the BGP Underlay DUT IPv6 Address to be configured. Type: ipv6 Default: 2000::1 |
||||||
DutIpv6AddrStep |
Specifies the BGP Underlay DUT IPv6 Address step to be configured. Type: ipv6 Default: 0::1 |
||||||
GatewayIpAddress |
Specifies the BGP Underlay Gateway Ip to be configured. Type: ip Default: 192.168.100.1 |
||||||
GatewayIpAddressStep |
Specifies the BGP Underlay Gateway Ip Step to be configured. Type: ip Default: 0.0.0.1 |
||||||
GatewayIpv6Addr |
Specifies the BGP Underlay Gateway IPv6 Address to be configured. Type: ipv6 Default: 2000::1 |
||||||
GatewayIpv6AddrStep |
Specifies the BGP Underlay Gateway IPv6 Address Step to be configured. Type: ipv6 Default: 0::1 |
||||||
IpAddress |
Specifies the BGP Underlay Interface Ip Address to be configured. Type: ip Default: 192.168.100.2 |
||||||
IpAddressStep |
Specifies the BGP Underlay Interface Ip Step to be configured. Type: ip Default: 0.0.0.1 |
||||||
Ipv6Addr |
Specifies the BGP Underlay IPv6 Address to be configured Type: ipv6 Default: 2000::2 |
||||||
Ipv6AddrStep |
Specifies the BGP Underlay IPv6 Address step to be configured Type: ipv6 Default: 0::1 |
||||||
Ipv6LinkLocalAddr |
Specifies the BGP Underlay IPv6 Link Local Address to be configured Type: ipv6 Default: FE80::1 |
||||||
Ipv6PrefixLength |
Specifies the Prefix Length of BGP Underlay IPv6 Prefixes to be configured. Type: u8 Default: 64 Range: 0 - 128 |
||||||
Ipv6RouterId |
Specifies the BGP Underlay Router ID IPv6 Address to be configured. Type: ipv6 Default: 2001::1 |
||||||
Ipv6RouterIdStep |
Specifies the BGP Underlay Router ID IPv6 Address step to be configured. Type: ipv6 Default: 0::1 |
||||||
MacAddress |
Specifies the BGP Underlay MAC address to be configured. Type: mac Default: 10:00:00:10:00:01 |
||||||
MacAddressStep |
Specifies the BGP Underlay MAC Address Step to be configured. Type: mac Default: 00:00:00:00:00:01 |
||||||
PrefixLength |
Specifies the BGP Underlay prefix to be configured. Type: u8 Default: 24 Range: 0 - 32 |
||||||
RouterId |
Specifies the BGP Underlay Router ID Address to be configured. Type: ip Default: 10.1.1.1 |
||||||
RouterIdStep |
Specifies the BGP Underlay Router ID Step Address to be configured. Type: ip Default: 0.0.0.1 |
||||||
UseGatewayAsDut |
Enable Use Gateway as DUT on BGP Underlay Type: bool Default: FALSE Possible Values:
|
There are no read-only attributes.