Ieee80211Phy Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

IEEE 802.11 physical.

Parents: Port

Children: PhyCompensationOptions

Relations:

Side name
(Type)		 Relative Description
ActivePhyPort
(ActivePhy)

Port

Active physical relation.
ApplicableOnPhySource
(ApplicableOnPhy)

EthIIIf

Specifies physical layer compatibility

Ieee80211Phy Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
AccessPointBandwidth

Access-Point Operational Bandwidth

Type: enum

Default: AP_OPBW_80M

Possible Values:

Value Description
AP_OPBW_20M

20MHz Bandwidth
AP_OPBW_40M

40MHz Bandwidth

AP_OPBW_80M

80MHz Bandwidth

AP_OPBW_80P80M

80+80MHz Bandwidth

AP_OPBW_160M

160MHz Bandwidth

AccessPointChannel

Access-Point Channel

Type: u32

Default: 36

Range: 1 - 165
AccessPointGuardIntervalMode

Access-Point Guard Interval Mode

Type: enum

Default: GI_MODE_SHORT

Possible Values:

Value Description
GI_MODE_SHORT

Short Mode
GI_MODE_LONG

Long Mode
AccessPointHt40Mode

Access-Point HT40 mode

Type: enum

Default: HT40MODE_AUTO

Possible Values:

Value Description
HT40MODE_AUTO

HT40 Auto Mode
HT40MODE_PLUS

HT40 Plus Mode
HT40MODE_MINUS

HT40 Minus Mode
AccessPointOperationalMode

Access-Point Operational Mode

Type: enum

Default: AP_OPMODE_G_N_AX

Possible Values:

Value Description
AP_OPMODE_A

802.11a Mode
AP_OPMODE_A_N

802.11a,n Mode
AP_OPMODE_A_N_AC

802.11a,n,ac Mode
AP_OPMODE_A_N_AC_AX

802.11a,n,ac,ax Mode
AP_OPMODE_B

802.11b Mode
AP_OPMODE_G

802.11g Mode
AP_OPMODE_G_N

802.11g,n Mode
AP_OPMODE_G_N_AX

802.11b/g/n/ax
AccessPointSecondaryChannel

Access-Point Secondary Channel

Type: u32

Default: 0

Range: 0 - 165
AntennaList

Antenna selection list.

Type: u32

Default: 1
APOperationalMode_2_4G

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

Access-Point Operational Mode In 2.4G

Type: enum

Default: AP_OPMODE_B

Possible Values:

Value Description
AP_OPMODE_B

Mode/b
AP_OPMODE_G

Mode/g

AP_OPMODE_G_N

Mode/g/n

AP_OPMODE_G_N_AX

802.11b/g/n/ax
APOperationalMode_5G

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

Access-Point Operational Mode In 5G

Type: enum

Default: AP_OPMODE_A

Possible Values:

Value Description
AP_OPMODE_A

Mode/a
AP_OPMODE_A_N

Mode/a/n

AP_OPMODE_A_N_AC

Mode/a/n/ac

AP_OPMODE_A_N_AC_AX

Mode/a/n/ac/ax

ApplyAllAttenuators

Apply All Attenuators.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use all SMA attenuators in the configuration.
FALSE

Use all SMA attenuators in the configuration.
AssociationDelayInSeconds

Association delay in seconds.

Type: u32

Default: 0

Range: 0 - 4294967295
AssociationLoadMode

Association load mode.

Type: enum

Default: SEQUENTIAL

Possible Values:

Value Description
SEQUENTIAL

Sequential.
RANDOM

Random.
AssociationLoadType

Association load type.

Type: enum

Default: FIXED

Possible Values:

Value Description
FIXED

Fixed
RANDOM

Random
AssociationTimeout

Association timeout in seconds.

Type: u32

Default: 30

Range: 1 - 4294967295
BssColor

Use this property to set the BSS color.

Type: u32

Default: 29

Range: 0 - 63
ChannelBandwidth160Mhz

Channel Bandwidth 160MHz

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use the channel bandwidth of 160MHz in the configuration.
FALSE

Indicates not to use the channel bandwidth of 160MHz in the configuration.
ChannelBandwidth20Mhz

Channel Bandwidth 20MHz

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use the channel bandwidth of 20MHz in the configuration.
FALSE

Indicates not to use the channel bandwidth of 20MHz in the configuration.
ChannelBandwidth40Mhz

Channel Bandwidth 40MHz

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use the channel bandwidth of 40MHz in the configuration.
FALSE

Indicates not to use the channel bandwidth of 40MHz in the configuration.
ChannelBandwidth80Mhz

Channel Bandwidth 80MHz

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use the channel bandwidth of 80MHz in the configuration.
FALSE

Indicates not to use the channel bandwidth of 80MHz in the configuration.
CountryRegion

Country region.

Type: enum

Default: USA

Possible Values:

Value Description
USA

USA
CHINA

China
JAPAN

Japan
INDIA

India
FRANCE

France
GERMANY

Germany
UNITED_KINGDOM

United Kingdom
CustomFecMode

Set to configure the custom Fec mode on the port.

Type: enum

Default: KR_FEC

Possible Values:

Value Description
NONE

No custom FEC mode.
KR_FEC

KR FEC mode.
RS_FEC

RS FEC mode.
KP4_FEC

KP4 FEC mode.
DataPathMode

Sets the path for the port to transmit data.

Type: enum

Default: NORMAL

Possible Values:

Value Description
NORMAL

Port will transmit normally.
LOCAL_LOOPBACK

Port will transmit in a loopback mode, so transmitted data will be received by the transmitting port without going out on the wire.
LINE_MONITOR

Port will be placed in line monitor mode. All received packets will be transmitted as is but can also be captured on the port.
DataRate11Mbps

11 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate12Mbps

12 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate18Mbps

18 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate1Mbps

1 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate24Mbps

24 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate2Mbps

2 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate36Mbps

36 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate48Mbps

48 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate54Mbps

54 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate5dot5Mbps

5.5 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate6Mbps

6 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRate9Mbps

9 Mbps Rate

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs0

BPSK-(0,8,16,24)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs1

QPSK 1/2-(1,9,17,25)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs2

QPSK 3/4-(2,10,18,26)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs3

16-QAM 1/2-(3,11,19,27)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs4

16-QAM 3/4-(4,12,20,28)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs5

64-QAM 2/3-(5,13,21,29)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs6

64-QAM 3/4-(6,14,22,30)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DataRateMcs7

64-QAM 5/6-(7,15,23,31)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Enabled
FALSE

Disabled
DFSTestMode

Note: In DFS test mode, the AP does not do actual channel switch upon detection of DFS radar signals. Changing this mode requires that ports be taken offline and then brought back online in order for changes to take effect.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Channel switch upon detection
FALSE

No channel switch detection
DisableBackPressure

Whether to disable transmit back pressure

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates whether the intended traffic is held by Wi-Fi lower rate.
FALSE

Indicates whether the intended traffic is NOT held by Wi-Fi lower rate.
DisableExtNss

Use this property to indicate if extended NSS is disabled.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates extended NSS is disabled
FALSE

Indicates extended NSS is enabled
DisableTwt

Use this property to indicate if it disable TWT.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to disable TWT in the configuration.
FALSE

Indicates to enable TWT in the configuration.
DownlinkMuMimo

Downlink MU-MIMO

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use Downlink MU-MIMO in the configuration.
FALSE

Indicates not to use Downlink MU-MIMO in the configuration.
DownlinkOFDMA

Downlink OFDMA.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use Downlink OFDMA in the configuration.
FALSE

Indicates not to use Downlink OFDMA in the configuration.
DualCarrierModulation

Dual Carrier Modulation

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use DCM in the configuration.
FALSE

Indicates not to use DCM in the configuration.
DurationBasedRts

Duration Based RTS

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use DBRT in the configuration.
FALSE

Indicates not to use DBRT in the configuration.
Enable80211kRoaming

Use this property to indicate if it enables 802.11k.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to enable 802.11k in the configuration.
FALSE

Indicates not to enable 802.11k in the configuration.
Enable80211vRoaming

Use this property to indicate if it enables 802.11v.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to enable 802.11v in the configuration.
FALSE

Indicates not to enable 802.11v in the configuration.
EnableAccessPointMode

Enables Access Point Mode

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Enable Access Point Mode
FALSE

Disable Access Point Mode
EnableBssColorDetection

Use this property to indicate if it enables BSS color detection.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to enable BSS color detection in the configuration.
FALSE

Indicates not to enable BSS color detection in the configuration.
EnableFirmwareDebug

Use this property to indicate if firmware debug is enabled.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates firmware debug is enabled
FALSE

Indicates firmware debug is disabled
EnableNoiseGenerator

Use this property to indicate if it enables noise generator.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to enable noise generator in the configuration.
FALSE

Indicates not to enable noise generator in the configuration.
EnablePortLevelPower

Enable port level power.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
EnableRadioPower

Enable radio power.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
EnableRtsCts

Use this property to indicate if it enables RTS/CTS.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to enable RTS/CTS in the configuration.
FALSE

Indicates not to enable RTS/CTS in the configuration.
EnableVht2g

Use this property to indicate if it enable VHT on 2.4G radio.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to enable VHT on 2.4G radio in the configuration.
FALSE

Indicates to disable VHT on 2.4G radio in the configuration.
ExtendedRange

Extended Range

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use Extended Range in the configuration.
FALSE

Indicates not to use ExtendedRange in the configuration.
FastTransitionRoamingThreshold

Use this property to configure the fast transition roaming threshold.

Type: s8

Default: 12
FirmwareSwitchForAlpTesting

Use this property to enable firmware switch for ALP testing.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to enable firmware switch for ALP testing in the configuration.
FALSE

Indicates to disable firmware switch for ALP testing in the configuration.
ForwardErrorCorrection

Forward error correction(FEC).

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
FragmentationLevel

Use this property to set the level of fragmentation.

Type: u32

Default: 2

Range: 0 - 3
FrequencyBand

Frequency band.

Type: enum

Default: FREQ_5_0_GHZ

Possible Values:

Value Description
FREQ_AUTO

Auto
FREQ_2_4_GHZ

2.4 GHz
FREQ_5_0_GHZ

5.0 GHz
FREQ_6_0_GHZ

6.0 GHz
HeRxMcsType

Use this property to set the HE Rx MCS Type.

Type: enum

Default: HE_RX_TYPE_0_11

Possible Values:

Value Description
HE_RX_TYPE_NONE

None
HE_RX_TYPE_0_7

HE 0-7
HE_RX_TYPE_0_9

HE 0-9
HE_RX_TYPE_0_11

HE 0-11
HeTxMcsType

Use this property to set the HE Tx MCS Types.

Type: enum

Default: HE_TX_TYPE_0_11

Possible Values:

Value Description
HE_TX_TYPE_NONE

None
HE_TX_TYPE_0_7

HE 0-7
HE_TX_TYPE_0_9

HE 0-9
HE_TX_TYPE_0_11

HE 0-11
HE_TX_TYPE_0

HE 0
HE_TX_TYPE_1

HE 1
HE_TX_TYPE_2

HE 2
HE_TX_TYPE_3

HE 3
HE_TX_TYPE_4

HE 4
HE_TX_TYPE_5

HE 5
HE_TX_TYPE_6

HE 6
HE_TX_TYPE_7

HE 7
HE_TX_TYPE_8

HE 8
HE_TX_TYPE_9

HE 9
HE_TX_TYPE_10

HE 10
HE_TX_TYPE_11

HE 11
HE_TX_TYPE_12

HE 12
HE_TX_TYPE_13

HE 13
HighEfficiencyMcs0

High-Efficiency Modulation and Coding Scheme #0

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs1

High-Efficiency Modulation and Coding Scheme #1

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs10

High-Efficiency Modulation and Coding Scheme #10

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs11

High-Efficiency Modulation and Coding Scheme #11

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs2

High-Efficiency Modulation and Coding Scheme #2

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs3

High-Efficiency Modulation and Coding Scheme #3

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs4

High-Efficiency Modulation and Coding Scheme #4

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs5

High-Efficiency Modulation and Coding Scheme #5

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs6

High-Efficiency Modulation and Coding Scheme #6

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs7

High-Efficiency Modulation and Coding Scheme #7

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs8

High-Efficiency Modulation and Coding Scheme #8

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
HighEfficiencyMcs9

High-Efficiency Modulation and Coding Scheme #9

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this MCS in the configuration.
FALSE

Indicates not to use this MCS in the configuration.
IgnoreLinkStatus

Allow the port to continue transmitting traffic if the link(s) with its peer port(s) goes down. NOTE: Feature availability depends on module/card type.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
Layer2Mode

Layer 2 mode.

Type: enum

Default: IEEE802_11

Possible Values:

Value Description
IEEE802_11

IEEE 802.11
LineSpeed

Sets the line speed for the port.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Speed unknown.
SPEED_1G

Speed 1G.
SPEED_2_5G

Speed 2.5G.
SPEED_5G

Speed 5G.
SPEED_10G

Speed 10G.
LongTrainingField

Use this property to set the Long Training Field.

Type: enum

Default: LTF_MODE_AUTO

Possible Values:

Value Description
LTF_MODE_AUTO

Long Training Field Mode AUTO
LTF_MODE_LTFX1

Long Training Field Mode X1
LTF_MODE_LTFX2

Long Training Field Mode X2
LTF_MODE_LTFX4

Long Training Field Mode X4
MaxNumberofAMPDU

Max.Number of AMPDUs

Type: u32

Default: 255

Range: 1 - 255
MaxNumberofAMSDU

Max.Number of AMSDUs

Type: u32

Default: 7

Range: 1 - 31
MediaType

Media type.

Type: enum

Default: IEEE802_11

Possible Values:

Value Description
IEEE802_11

IEEE 802.11.
UNKNOWN

Unknown.
MimoMode

NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it.

List of MIMO modes

Type: enum

Default: SU_MIMO

Possible Values:

Value Description
SU_MIMO

Single-User MIMO
MU_MIMO

Multi-User MIMO
MimoType

MIMO Configuration.

Type: enum

Default: MIMO_4X4

Possible Values:

Value Description
MIMO_MODE_NA

Mimo not available.
MIMO_1X1

Mimo 1x1.
MIMO_2X2

Mimo 2x2.
MIMO_3X3

Mimo 3x3.
MIMO_4X4

Mimo 4x4.
MIMO_5X5

Mimo 5X5.
MIMO_6X6

Mimo 6x6.
MIMO_7X7

Mimo 7x7.
MIMO_8X8

Mimo 8x8.
Mtu

Maximum transmission unit.

Type: u32

Default: 1500

Range: 0 - 16383
NoiseGeneratorChannel

Use this property to indicate which channel to use for noise generator.

Type: u32

Default: 36

Range: 1 - 165
PortSetupMode

Exclusively configures port setup or hardware register parameters.

Type: enum

Default: PORTCONFIG_ONLY

Possible Values:

Value Description
PORTCONFIG_ONLY

Portconfig only.
REGISTERS_ONLY

Registers only.
PowerLevel

Power attenuation.

Type: u32

Default: 0

Range: 0 - 30
PowerLevelChannel

Allows the reduction in the strength of a channel signal

Type: u32

Default: 127

Range: 0 - 127
PowerLevelType

Port level power.

Type: enum

Default: POWER_AUTO

Possible Values:

Value Description
POWER_OFF

Power off.
POWER_AUTO

Power auto.
POWER_FIXED

Power fixed.
ScanningThreshold80211k

Use this property to configure the 802.11k scanning threshold.

Type: s8

Default: -75
Sma1

SMA (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma10

SMA10 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma11

SMA11 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma12

SMA12 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma2

SMA2 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma3

SMA3 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma4

SMA4 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma5

SMA5 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma6

SMA6 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma7

SMA7 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma8

SMA8 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
Sma9

SMA9 (SubMiniature version A)

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to use this SMA in the configuration.
FALSE

Indicates not to use this SMA in the configuration.
SmaAttenuator1

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator10

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator11

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator12

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator2

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator3

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator4

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator5

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator6

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator7

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator8

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaAttenuator9

Use this property to vary the level of attenuation.

Type: u32

Default: 127

Range: 0 - 254
SmaStartIndex

Use this property to indicate the start index of the sma.

Type: u32

Default: 0

Range: 0 - 8
SupportChannelAttenuation

Support channel attenuation

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support channel attenuation in the configuration.
FALSE

Indicates not to support channel attenuation in the configuration.
SupportChannelAttenuationSma

Enable Channel Attenuation Sma

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support channel attenuation sma in the configuration.
FALSE

Indicates not to support channel attenuation sma in the configuration.
SupportChannelBandwidth160Mhz

Enable Channel Bandwidth 160MHz

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support the channel bandwidth of 160MHz in the configuration.
FALSE

Indicates not to support the channel bandwidth of 160MHz in the configuration.
SupportChannelBandwidth20Mhz

Enable Channel Bandwidth 20MHz

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support the channel bandwidth of 20MHz in the configuration.
FALSE

Indicates not to support the channel bandwidth of 20MHz in the configuration.
SupportChannelBandwidth40Mhz

Enable Channel Bandwidth 40MHz

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support the channel bandwidth of 40MHz in the configuration.
FALSE

Indicates not to support the channel bandwidth of 40MHz in the configuration.
SupportChannelBandwidth80Mhz

Enable Channel Bandwidth 80MHz

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support the channel bandwidth of 80MHz in the configuration.
FALSE

Indicates not to support the channel bandwidth of 80MHz in the configuration.
SupportFrequency2G

Enable Frequency 2.4G

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support Frequency 2.4G in the configuration.
FALSE

Indicates not to support Frequency 2.4G in the configuration.
SupportFrequency5G

Enable Frequency 5G

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support Frequency 5G in the configuration.
FALSE

Indicates not to support Frequency 5G in the configuration.
SupportFrequency6G

Use this property to indicate if it supports 6g radio.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support Frequency 6G in the configuration.
FALSE

Indicates not to support Frequency 6G in the configuration.
SupportFrequencyAuto

Enable Frequency Auto

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support Frequency Auto in the configuration.
FALSE

Indicates not to support Frequency Auto in the configuration.
SupportFrequencyTriBand

Use this property to indicate if it supports Tri-Band radio.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support Frequency Tri-Band in the configuration.
FALSE

Indicates not to support Frequency Tri-Band in the configuration.
SupportHighEfficiency

Enable High Efficiency

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support high efficiency in the configuration.
FALSE

Indicates not to support high efficiency in the configuration.
SupportHtConfigEdit

Enable HT Config Edit

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

Indicates to edit ht config in the configuration.
FALSE

Indicates not to edit ht config in the configuration.
SupportRateChange

Enable Rate Config

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support rate change in the configuration.
FALSE

Indicates not to support rate change in the configuration.
SupportVhtConfigEdit

Enable VHT Config Edit

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to edit vht config in the configuration.
FALSE

Indicates not to edit vht config in the configuration.
SupportVhtMcsTypes

Support VHT MCS Type

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to support vht mcs type in the configuration.
FALSE

Indicates not to support vht mcs type in the configuration.
TrafficPassthrough

Whether to enable Wlan traffic passthrough

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to forward Wlan stations' traffic to outer network.
FALSE

Indicates not forward Wlan stations' traffic to outer network.
UplinkMuMimo

Uplink MU-MIMO

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use Uplink MU-MIMO in the configuration.
FALSE

Indicates not to use Uplink MU-MIMO in the configuration.
UplinkOFDMA

Uplink OFDMA.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

Indicates to use Uplink OFDMA in the configuration.
FALSE

Indicates not to use Uplink OFDMA in the configuration.
UseHighestMcsIndex

Whether to use the highest MCS index.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

When true it will use the highest MCS index.

FALSE

When false it will not use the highest MCS index.

VhtMcsType

VHT MCS Types

Type: enum

Default: VHT_TYPE_0_9

Possible Values:

Value Description
VHT_TYPE_NONE

None

VHT_TYPE_0_7

0-7

VHT_TYPE_0_8

0-8

VHT_TYPE_0_9

0-9

VHT_TYPE_0_11

VHT 0-11
VhtRxMcsType

Use this property to set the VHT Rx MCS Type.

Type: enum

Default: VHT_TYPE_0_9

Possible Values:

Value Description
VHT_TYPE_NONE

None
VHT_TYPE_0_7

VHT 0-7
VHT_TYPE_0_8

VHT 0-8
VHT_TYPE_0_9

VHT 0-9
VHT_TYPE_0_11

VHT 0-11
VhtTxMcsType

Use this property to set the VHT Tx MCS Type.

Type: enum

Default: VHT_TX_TYPE_0_9

Possible Values:

Value Description
VHT_TX_TYPE_NONE

None
VHT_TX_TYPE_0_7

VHT 0-7
VHT_TX_TYPE_0_8

VHT 0-8
VHT_TX_TYPE_0_9

VHT 0-9
VHT_TX_TYPE_0_11

VHT 0-11
VHT_TX_TYPE_0

VHT 0
VHT_TX_TYPE_1

VHT 1
VHT_TX_TYPE_2

VHT 2
VHT_TX_TYPE_3

VHT 3
VHT_TX_TYPE_4

VHT 4
VHT_TX_TYPE_5

VHT 5
VHT_TX_TYPE_6

VHT 6
VHT_TX_TYPE_7

VHT 7
VHT_TX_TYPE_8

VHT 8
VHT_TX_TYPE_9

VHT 9
VHT_TX_TYPE_10

VHT 10
VHT_TX_TYPE_11

VHT 11

Ieee80211Phy Read-Only Attributes

Read-Only Attribute Description
AdvertisementType

Advertisement Type.

Type: enum

Default: IEEE

Possible Values:

Value Description
NA

Not Applicable.
IEEE

IEEE.
NBASET

NBASE-T.
AutoNegotiationStatus

Auto negotiation status.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
CustomFecModeKrRsStatus

State of the custom FEC mode of this port.

Type: enum

Default: NONE

Possible Values:

Value Description
NONE

No custom FEC mode.
KR_FEC

KR FEC mode.
RS_FEC

RS FEC mode.
KP4_FEC

KP4 FEC mode.
CustomFecModeStatus

Custom Fec mode status.

Type: string

Default: None
CustomFecTypeStatus

Custom Fec type status.

Type: string

Default: None
ForwardErrorCorrectionStatus

Forward error correction status.

Type: bool

Default: TRUE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
IpqVersion

Use this property to indicate the IPQ software version.

Type: u32

Default: 0
IsEnforceMtuOnRxSupported

Enforce MTU for RX control support.

Type: bool

Default: FALSE

Possible Values:

Value Description
TRUE

True.
FALSE

False.
LineSpeedStatus

Line speed status.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Speed unknown.
SPEED_1G

Speed 1G.
SPEED_2_5G

Speed 2.5G.
SPEED_5G

Speed 5G.
SPEED_10G

Speed 10G.
LinkStatus

Link status.

Type: enum

Default: NONE

Possible Values:

Value Description
DOWN

Link is down.
UP

Link is up.
ERROR

Link has error.
ADMIN_DOWN

Link is administratively down.
UP_SW_DISABLED

The link is up, but is disabled by software.
SONET

Link is SONET.
NONE

No link present.
ModuleFwVersion

Module firmware version.

Type: string

Default: N/A
ModuleHwVersion

Module hardware version.

Type: string

Default: N/A
ModuleType

Module type plugs into the PersonalityCardType.

Type: enum

Default: NA

Possible Values:

Value Description
NA

Hot-plugging module is not supported.
UNKNOWN

A module has been plugged in but cannot be identified.
ABSENT

No module plugged in.
SFP_FIBER

SFP fiber media.
SFP_Copper

SFP copper media.
XFP

XFP
XENPAK

Xenpak
X2

X2
E1000

E1000

TEN_GBASE_T

10GBASE-T

SFP_PLUS

SFP Plus

CFP

CFP
QSFP_PLUS

QSFP Plus
CXP

CXP
CFP2

CFP2
CFP4

CFP4
QSFP28

QSFP28
IEEE80211

IEEE 802.11
SFP28

SFP28
CFP8

CFP8
QSFPDD

QSFPDD
OSFP

OSFP
FLEXE

FLEXE
QSFP56

QSFP56
QSFP_PLUS_CMIS

QSFP Plus CMIS
PersonalityCardType

Personality card type. This is the plugin module to the host card.

Type: enum

Default: NA

Possible Values:

Value Description
NA

Hot-plugging personality card is not supported.
UNKNOWN

A personality card has been plugged in but cannot be identified.
ABSENT

No personality card plugged in.
SFP

SFP
XFP

XFP
XENPAK

Xenpak
X2

X2
TEN_GBASE_T

10GBASE-T
CFP

CFP
CFP_QSFP

CFP QSFP
CFP_CXP

CFP CXP
CFP2

CFP2
CFP2_CXP

CFP2 CXP
CFP2_CFP4

CFP2 CFP4
CFP2_QSFP28

CFP2 QSFP28
CFP4

CFP4
QSFP28

QSFP28
IEEE80211

IEEE 802.11
SFP28

SFP28
CFP8

CFP8
QSFP_PLUS

QSFP_PLUS
QSFPDD

QSFPDD
OSFP

OSFP
QSFP56

QSFP56
QSFP_PLUS_CMIS

QSFP_PLUS_CMIS
QualifiedState

Qualified state.

Type: enum

Default: UNVERIFIED

Possible Values:

Value Description
UNVERIFIED

Unverified
QUALIFIED

Qualified
KNOWN_WORKING

Known working
RadioLinkStatus

Link status.

Type: enum

Default: NONE

Possible Values:

Value Description
DOWN

Down.
UP

Up.
ERROR

Error.
ADMIN_DOWN

Admin down.
UP_SW_DISABLED

The link is up, but is disabled by software.
NONE

None.
SupportedFrequencies

List of supported frequencies

Type: enum

Default: FREQ_5_0_GHZ

Possible Values:

Value Description
FREQ_AUTO

Auto
FREQ_2_4_GHZ

2.4 GHz
FREQ_5_0_GHZ

5.0 GHz
FREQ_6_0_GHZ

6.0 GHz
SupportedSpeeds

List of supported line speeds.

Type: enum

Default: SPEED_1G

Possible Values:

Value Description
SPEED_UNKNOWN

Speed unknown.
SPEED_1G

Speed 1G.
SPEED_2_5G

Speed 2.5G.
SPEED_5G

Speed 5G.
SPEED_10G

Speed 10G.
TechnologyType

Technology type.

Type: enum

Default: MODULE_NONE

Possible Values:

Value Description
MODULE_NONE

None.
MODULE_IEEE80211_N

IEEE 802.11N
MODULE_IEEE80211_AC

IEEE802.11AC
MODULE_IEEE80211_AC_2_5G

IEEE802.11 AC 2.5G
MODULE_IEEE80211_AX

IEEE802.11 AX
TransceiverType

Displays the first transceiver type presented by the hardware.

Type: enum

Default: MODULE_NONE

Possible Values:

Value Description
MODULE_NONE

Module none.
MODULE_10GBASE_ER

Module 10G Base ER.
MODULE_10GBASE_LR

Module 10G Base LR.
MODULE_10GBASE_SR

Module 10G Base SR.
MODULE_10GBASE_EW

Module 10G Base EW.
MODULE_10GBASE_LW

Module 10G Base LW.

MODULE_10GBASE_SW

Module 10G Base SW.
MODULE_10GBASE_CX4

Module 10G Base CX4.
MODULE_10GBASE_LX4

Module 10G Base LX4.
SPIRENT_10GBASE_CX4

SPIRENT 10G BASE CX4.
MODULE_OC48_LR

MODULE OC48 LR.
MODULE_OC48_IR

MODULE OC48 IR.
MODULE_OC48_SR

MODULE OC48 SR.
MODULE_OC12_LR

MODULE OC12 LR.
MODULE_OC12_IR

MODULE OC12 IR.
MODULE_OC12_SR

MODULE OC12 SR.
MODULE_OC3_LR

MODULE OC3 LR.
MODULE_OC3_IR

MODULE OC3 IR.
MODULE_OC3_SR

MODULE OC3 SR.
MODULE_OC192_LR

MODULE OC192 LR.
MODULE_OC192_IR

MODULE OC192 IR.
MODULE_OC192_SR

MODULE OC192 SR.
MODULE_OC192_VR

MODULE OC 192 VR.
MODULE_10GBASE_T

MODULE 10G BASE T.
MODULE_XFP_CX4

MODULE XFP CX4.
MODULE_XFP_E

MODULE XFP E.
MODULE_1000BASE_T

MODULE 1000 BASE T.
MODULE_1000BASE_CX

MODULE 1000 BASE CX.
MODULE_1000BASE_LX

MODULE 1000 BASE LX.
MODULE_1000BASE_SX

MODULE 1000 BASE SX.
MODULE_40GBASE_LR

MODULE 40G BASE LR.
MODULE_40GBASE_SR

MODULE 40G BASE SR.
MODULE_40GBASE_CR4

MODULE 40G BASE CR4.
MODULE_40GBASE_SR4

MODULE 40G BASE SR4.
MODULE_40GBASE_LR4

MODULE 40G BASE LR4.
MODULE_100GBASE_LR

MODULE 100G BASE LR.
MODULE_100GBASE_SR

MODULE 100G BASE SR.
MODULE_100GBASE_SR10

MODULE 100G BASE SR10.
MODULE_100GBASE_CR10

MODULE 100G BASE CR10.
MODULE_100GBASE_LR4

MODULE 100G BASE LR4.
MODULE_FC_2G

MODULE FC 2G.
MODULE_FC_4G

MODULE FC 4G.
MODULE_FC_8G

MODULE FC 8G.
MODULE_FC_10G

MODULE FC 10G.
MODULE_100BASE_FX

MODULE 1000BASE FX.
MODULE_SFP_PLUS_COPPER

MODULE SFP PLUS COPPER.
MODULE_QSFP_ALPHA_BETA

MODULE QSFP ALPHA BETA.
MODULE_SFP_100BASE_LX

MODULE SFP 100BASE LX.
MODULE_SFP_GBE_BASE_BX10

MODULE SFP GBE BASE BX10.
MODULE_SFP_GBE_BASE_PX

MODULE SFP GBE BASE PX.
MODULE_CXP_ALPHA_BETA

MODULE CXP ALPHA BETA.
MODULE_100GBASE_CR4

MODULE 100G BASE CR4.
MODULE_100GBASE_SR4

MODULE 100G BASE SR4.
MODULE_100GBASE_AOC

MODULE 100G BASE AOC.
MODULE_IEEE80211_N

MODULE IEEE802.11 N.
MODULE_IEEE80211_AC

MODULE IEEE802.11 AC.
MODULE_25GBASE_CR4

MODULE 25G BASE CR4.
MODULE_25GBASE_SR4

MODULE 25G BASE SR4.
MODULE_100GBASE_ER4

MODULE 100G BASE ER4.
MODULE_100G_CWDM4_FEC

MODULE 100G CWDM4 FEC.
MODULE_100G_CWDM4_NO_FEC

MODULE 100G CWDM4 NO FEC.
MODULE_100G_PSM4

MODULE 100G PSM4.
MODULE_100G_CLR4

MODULE 100G CLR4.
MODULE_IEEE80211_AC_2_5G

MODULE IEEE 802.11 AC 2.5G.
MODULE_FC_16G

MODULE FC 16G.
MODULE_FC_32G

MODULE FC 32G.
MODULE_25GBASE_SR

MODULE 25G BASE SR.
MODULE_25GBASE_LR

MODULE 25G BASE LR.
MODULE_25GBASE_ER

MODULE 25G BASE ER.
MODULE_25GBASE_CR_CA_L

MODULE 25G BASE CR CA-L.
MODULE_25GBASE_CR_CA_S

MODULE 25G BASE CR CA-S.
MODULE_25GBASE_CR_CA_N

MODULE 25G BASE CR CA-N.
MODULE_400GBASE_SR16

400GBASE-SR16
MODULE_400GBASE_DR4

400GBASE-DR4
MODULE_400GBASE_FR8

400GBASE-FR8
MODULE_400GBASE_LR8

400GBASE-LR8
MODULE_40GBASE_AOC

40GBASE-AOC
MODULE_1000BASE_T1

1000BASE T1
MODULE_100BASE_T1

100BASE T1
MODULE_IEEE80211_AX

MODULE IEEE80211 AX
MODULE_50GBASE_CR

50GBASE-CR
MODULE_100GBASE_CR2

100GBASE-CR2
MODULE_200GBASE_CR4

200GBASE-CR4
MODULE_400GBASE_CR8

400GBASE-CR8
MODULE_FLEX_ETHERNET

Flexible Ethernet
MODULE_5GBASE_T

5GBASE T
MODULE_2500BASE_T

2500BASE T
MODULE_100BASE_T

100BASE T
MODULE_UNDEFINED

Undefined
MODULE_CUSTOM

Custom
MODULE_XAUI

XAUI
MODULE_XFI

XFI
MODULE_SFI

SFI
MODULE_25GAUI_C2M

25GAUI C2M
MODULE_XLAUI_C2M

XLAUI C2M
MODULE_XLPPI

XLPPI
MODULE_LAUI_2_C2M

LAUI-2 C2M
MODULE_50GAUI_2_C2M

50GAUI-2 C2M
MODULE_50GAUI_1_C2M

50GAUI-1 C2M
MODULE_CAUI_4_C2M

CAUI-4 C2M
MODULE_CAUI_4_C2M_NO_FEC

CAUI-4 C2M without FEC
MODULE_CAUI_4_C2M_RS

CAUI-4 C2M with RSFEC
MODULE_100GAUI_4_C2M

100GAUI-4 C2M
MODULE_100GAUI_2_C2M

100GAUI-2 C2M
MODULE_200GAUI_8_C2M

200GAUI-8 C2M
MODULE_200GAUI_4_C2M

200GAUI-4 C2M
MODULE_400GAUI_16_C2M

400GAUI-16 C2M
MODULE_400GAUI_8_C2M

400GAUI-8 C2M
MODULE_RESERVED

Reserved
MODULE_50GBASE_CR2_RS

50GBASE-CR2 with RS
MODULE_50GBASE_CR2_BASE_R

50GBASE-CR2 with BASE-R
MODULE_50GBASE_CR2_NO_FEC

50GBASE-CR2 with no FEC
MODULE_400G_CR8

400G CR8
MODULE_25GBASE_T

25GBASE-T
MODULE_40GBASE_T

40GBASE-T
MODULE_50GBASE_T

50GBASE-T
MODULE_40GE_SWDM4

40GE SWDM4
MODULE_40GE_BIDI

40GE BiDi
MODULE_50GBASE_SR

50GBASE SR
MODULE_100GE_SWDM4

100GE SWDM4
MODULE_100GE_BIDI

100GE BiDi
MODULE_100GBASE_SR2

100GBASE-SR2
MODULE_100G_SR

100G-SR
MODULE_200GBASE_SR4

200GBASE-SR4
MODULE_400GBASE_SR8

400GBASE-SR8
MODULE_400G_SR4

400G-SR4
MODULE_800G_SR8

800G-SR8
MODULE_400GBASE_SR4_2

400GBASE-SR4.2
MODULE_10G_ZW

10G-ZW
MODULE_10G_ZR

10G-ZR
MODULE_40GBASE_FR

40GBASE-FR
MODULE_50GBASE_FR

50GBASE-FR
MODULE_50GBASE_LR

50GBASE-LR
MODULE_50GBASE_ER

50GBASE-ER
MODULE_100G_CWDM4_OCP

100G CWDM4-OCP
MODULE_100G_CWDM4

100G CWDM4
MODULE_100G_4WDM_10

100G 4WDM-10
MODULE_100G_4WDM_20

100G 4WDM-20
MODULE_100G_4WDM_40

100G 4WDM-40
MODULE_100GBASE_DR

100GBASE-DR
MODULE_100GBASE_FR1

100GBASE-FR1
MODULE_100GBASE_LR1

100GBASE-LR1
MODULE_200GBASE_DR4

200GBASE-DR4
MODULE_200GBASE_FR4

200GBASE-FR4
MODULE_200GBASE_ER4

200GBASE-ER4
MODULE_400GBASE_ER8

400GBASE-ER8
MODULE_400GBASE_FR4

400GBASE-FR4
MODULE_400GBASE_LR4_6

400GBASE-LR4-6
MODULE_400G_LR4_10

400G-LR4-10
MODULE_PASSIVE_COPPER

Passive Copper
MODULE_PASSIVE_LOOPBACK

Passive Loopback
MODULE_ACTIVE_CABLE_CODE1

Active cable assembly with BER less than 10e-12
MODULE_ACTIVE_CABLE_CODE2

Active cable assembly with BER less than 5x10e-5
MODULE_ACTIVE_CABLE_CODE3

Active cable assembly with BER less than 2.6x10e-4
MODULE_ACTIVE_CABLE_CODE4

Active cable assembly with BER less than 10e-6
MODULE_ACTIVE_LOOPBACK

Active Loopback
MODULE_OTHER

Other
MODULE_G959_1_P1I1_2D1

G959.1 profile P1I1-2D1
MODULE_G959_1_P1S1_2D2

G959.1 profile P1S1-2D2
MODULE_G959_1_P1L1_2D2

G959.1 profile P1L1-2D2
MODULE_100G_WDM

100G WDM
MODULE_ACTIVE_COPPER1

Active Copper PAM4 C2M worst BER 10e-6 or below
MODULE_ACTIVE_OPTICAL1

Active Optical PAM4 C2M worst BER 10e-6 or below
MODULE_ACTIVE_COPPER2

Active Copper PAM4 C2M worst BER 10e-5 or below
MODULE_ACTIVE_OPTICAL2

Active Optical PAM4 C2M worst BER 10e-5 or below
MODULE_200G_PSM4

200G PSM4
TransceiverTypeList

Displays a list of all transceiver types available on the connected hardware.

Type: string

Default: "" (empty string)

VendorName

Vendor name.

Type: string

Default: N/A
VendorPartNumber

Vendor part number.

Type: string

Default: N/A
VendorSerialNumber

Vendor serial number.

Type: string

Default: N/A