FlexEthernetConfig Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

Flex-Ethernet Configuration

Parents: Port

Relations:

Side name
(Type)		 Relative Description
AffiliatedFlexEthernetGroup
(AffiliationFlexEthernetGroup)

FlexEthernetGroup

Affiliation FlexEthernet Group relation.
AffiliatedFlexEthernetPhyConfig
(AffiliationFlexEthernetPhy)

FlexEthernetPhyConfig

Affiliation FlexEthernet PHY relation.
AffiliatedFlexEthernetPortGroup
(AffiliationFlexEthernetPortGroup)

PhysicalPortGroup

Affiliation FlexEthernet Port Group relation.

FlexEthernetConfig Writable Attributes

Attribute Description
Common Writable Attributes Active, Name

FlexEthernetConfig Read-Only Attributes

Read-Only Attribute Description
LinkStatus

Link Status

Type: enum

Default: NONE

Possible Values:

Value Description
DOWN

Link is down, possibly because a transceiver is not installed.
UP

Link is up.
ERROR

A link fault occurred.
ADMIN_DOWN

The link on the port was broken by the user, possibly via the L2TestBreakLinkCommand.
UP_SW_DISABLED

The link is up, but is disabled by software. One possible cause is if LACP is enabled but the LACP State is not up.
SONET

This state is not being used at this time.
NONE

No link status has been reported yet.
MaxClients

Maximum Clients.

Type: u8

Default: 32
MaxGroups

Maximum groups.

Type: u8

Default: 5
MaxPhys

Maximum phys.

Type: u8

Default: 5