Description:
Configuring L3 Vni parameters under Vxlan
Automatically created from: VxlanConfigGenParams
| Attribute | Description | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||||
| EnableVlan |
Specifies the option of enabling Vlan Tagging on VM Type: bool Default: FALSE Possible Values:
|
||||||||
| GatewayIpAddress |
Configuring Gateway IP Address Type: ip Default: 200.0.0.1 |
||||||||
| GatewayIpAddressStep |
Configuring Gateway IP Address Step Type: ip Default: 0.0.0.1 |
||||||||
| GatewayIpv6Address |
Configuring Gateway IP Address Type: ipv6 Default: 4001::1 |
||||||||
| GatewayIpv6AddressStep |
Configuring Gateway IP Address Increment Type: ipv6 Default: 0::1 |
||||||||
| HostIpAddress |
Configuring VM/Host Ip Address Type: ip Default: 200.0.0.2 |
||||||||
| HostIpv6Address |
Configuring VM/Host Ip Address Type: ipv6 Default: 4001::2 |
||||||||
| HostMacAddrStep |
Configuring Number of MAC Addresses Type: u32 Default: 1 |
||||||||
| HostMacPrefixLength |
Configuring Prefix Length Type: u8 Default: 48 Range: 1 - 48 |
||||||||
| Ipaddress |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ip Address Type: ip Default: 10.1.0.0 |
||||||||
| IpaddressIncrementPerPort |
Configuring Ip Address Increment per Port Type: ip Default: 0.0.0.0 |
||||||||
| IpaddressStep |
Configuring Ip Address Increment Type: ip Default: 0.0.0.1 |
||||||||
| IpaddressStepPerPort |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ip Address Step per Port Type: ip Default: 1.0.0.0 |
||||||||
| IpAddressStepPerSegment |
Configuring Ipv6 Address Increment per Segment Type: ip Default: 0.0.1.0 |
||||||||
| IpPrefix |
Configuring Ip Prefix Type: u32 Default: 24 Range: 0 - 32 |
||||||||
| Ipv6AddressIncrementPerPort |
Configuring Ipv6 Address Increment per Port Type: ipv6 Default: :: |
||||||||
| Ipv6AddressStep |
Configuring Ipv6 Address Increment Type: ipv6 Default: 0::1 |
||||||||
| Ipv6AddressStepPerSegment |
Configuring Ipv6 Address Increment per Segment Type: ipv6 Default: 0::1:0 |
||||||||
| Ipv6Prefix |
Configuring Ipv6 Prefix Type: u32 Default: 64 Range: 0 - 128 |
||||||||
| L3Vni |
Configuring L3 VNI increment value Type: u32 Default: 2000 Range: 0 - 16777215 |
||||||||
| L3VniStep |
Configuring L3 VNI increment value Type: u32 Default: 1 Range: 0 - 100000 |
||||||||
| MacAddress |
Configuring MAC Address Type: mac Default: 00:00:20:01:00:00 |
||||||||
| MacAddressStep |
Configuring MAC Address increment Type: mac Default: 00:00:00:00:00:01 |
||||||||
| SegmentsPerBlock |
Configuring number of Segments per block Type: u16 Default: 1 Range: 1 - 65535 |
||||||||
| UseSameVnisAcrossPorts |
Specifies the option of using Same VNIs Across Ports Type: bool Default: TRUE Possible Values:
|
||||||||
| UseSameVnisAcrossVteps |
Specifies the option of using Same VNIs Across VTEPs Type: bool Default: TRUE Possible Values:
|
||||||||
| VlanId |
Configuring Vlan Id Type: u16 Default: 1 Range: 0 - 4095 |
||||||||
| VlanIdStep |
Configuring VLAN ID Type: u16 Default: 1 Range: 0 - 4095 |
||||||||
| VmsPerSegment |
Configuring Number of VMs per Segment Type: u16 Default: 1 Range: 0 - 10000 |
||||||||
| Vni |
Configuring Vni Type: u32 Default: 1000 Range: 0 - 16777215 |
||||||||
| VniStep |
Configuring Increment Value Type: u32 Default: 1 Range: 0 - 100000 |
||||||||
| VxlanIpType |
Configuring Address mode with default value as Ipv4 Type: enum Default: IPV4 Possible Values:
|
||||||||
| VxlanSegmentsPerVtep |
Configuring Number of VXLAN Segments per VTEP Type: u16 Default: 1 Range: 1 - 65535 |
There are no read-only attributes.