Description:
Configuring General parameters for Host under VXLAN
Automatically created from: VxlanConfigGenParams
Attribute | Description | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Common Writable Attributes | Active, Name | ||||||||||
EnableIp |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Specifies the option of Enabling Ip Type: bool Default: TRUE Possible Values:
|
||||||||||
EnableVlan |
Specifies the option of enabling vlan tagging on VM Type: bool Default: FALSE Possible Values:
|
||||||||||
GatewayIpAddress |
Configuring Gateway IP Address Type: ip Default: 100.0.0.1 |
||||||||||
GatewayIpAddressStep |
Configuring Gateway IP Address Increment Type: ip Default: 0.0.0.1 |
||||||||||
GatewayIpv6Address |
Configuring Gateway Ipv6 Address Type: ipv6 Default: 2001::1 |
||||||||||
GatewayIpv6AddressStep |
Configuring Gateway Ipv6 Address Increment Type: ipv6 Default: 0::1 |
||||||||||
HostIpAddress |
Configuring VM/Host Ip Address Type: ip Default: 100.0.0.2 |
||||||||||
HostIpv6Address |
Configuring VM/Host Ip Address Type: ipv6 Default: 2001::2 |
||||||||||
HostMacAddrStep |
Configuring number of MAC Addresses of Host Type: u32 Default: 1 |
||||||||||
HostMacPrefixLength |
Configuring Prefix Length of Mac of Host Type: u8 Default: 48 Range: 1 - 48 |
||||||||||
Ipaddress |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ip Address Type: ip Default: 10.1.0.0 |
||||||||||
IpaddressIncrementPerPort |
Configuring Ip Address Increment per Port Type: ip Default: 0.0.0.0 |
||||||||||
IpaddressStep |
Configuring Ip Address Increment Type: ip Default: 0.0.0.1 |
||||||||||
IpaddressStepPerPort |
NOTE: This attribute is deprecated. It will be removed in subsequent releases, so it is recommended that you do not use it. Configuring Ip Address Increment per Port Type: ip Default: 1.0.0.0 |
||||||||||
IpAddressStepPerSegment |
Configuring Ip Address Increment per Segment Type: ip Default: 0.0.1.0 |
||||||||||
IpPrefix |
Configuring Ip Prefix Type: u32 Default: 24 Range: 0 - 32 |
||||||||||
Ipv6AddressIncrementPerPort |
Configuring Ipv6 Address Increment per Port Type: ipv6 Default: :: |
||||||||||
Ipv6AddressStep |
Configuring Ipv6 Address Increment Type: ipv6 Default: 0::1 |
||||||||||
Ipv6AddressStepPerSegment |
Configuring Ipv6 Address Increment per Segment Type: ipv6 Default: 0::1:0 |
||||||||||
Ipv6Prefix |
Configuring Ipv6 Prefix Type: u32 Default: 64 Range: 0 - 128 |
||||||||||
L3Vni |
Configuring L3-VNI Type: u32 Default: 200 Range: 0 - 16777215 |
||||||||||
L3VniForEvpnLearning |
Specifies the option of enabling L3 VNI For EVPN Learning Type: bool Default: FALSE Possible Values:
|
||||||||||
L3VniStep |
Configuring L3-VNI Increment Type: u32 Default: 1 Range: 0 - 100000 |
||||||||||
MacAddress |
Configuring MAC Address Type: mac Default: 00:00:10:01:00:00 |
||||||||||
MacAddressStep |
Configuring MAC Address Increment Type: mac Default: 00:00:00:00:00:01 |
||||||||||
SegmentsPerBlock |
Configuring Segments per block Type: u16 Default: 1 Range: 1 - 65535 |
||||||||||
UseSameVnisAcrossPorts |
Specifies the option of using same VNIs across Ports Type: bool Default: TRUE Possible Values:
|
||||||||||
UseSameVnisAcrossVteps |
Specifies the option of using same VNIs across VTEPs Type: bool Default: TRUE Possible Values:
|
||||||||||
VlanId |
Configuring Vlan Id Type: u16 Default: 1 Range: 0 - 4095 |
||||||||||
VlanIdStep |
Configuring VLAN ID Increment Type: u16 Default: 1 Range: 0 - 4095 |
||||||||||
VmsPerSegment |
Configuring Number of VMs per Segment Type: u16 Default: 1 Range: 0 - 10000 |
||||||||||
VmsPerVtep |
Configuring Number of VMs per VTEP Type: u16 Default: 0 Range: 0 - 10000 |
||||||||||
Vni |
Configuring Vni Type: u32 Default: 100 Range: 0 - 16777215 |
||||||||||
VniStep |
Configuring Vni Increment value Type: u32 Default: 1 Range: 0 - 100000 |
||||||||||
VxlanIpType |
Configuring the Address Mode with default vlaue as IPV4 Type: enum Default: IPV4 Possible Values:
|
||||||||||
VxlanSegmentsPerVtep |
Configuring number of vxlan segments per VTEP Type: u16 Default: 1 Range: 1 - 65535 |
There are no read-only attributes.