Description:
Defines the properties of NLRI.
Parents: BgpMpReachUnReachAttr
| Attribute | Description | ||||||
|---|---|---|---|---|---|---|---|
| Common Writable Attributes | Active, Name | ||||||
| BottomOfStack |
This field is applicable when Safi is Labeled IP or VPN. one bit value to identify bottom of label stack Type: bool Default: TRUE Possible Values:
|
||||||
| ExperimentalValue |
This field is applicable when Safi is Labeled IP or VPN. It is a 3 bit value used for experimental purpose. Type: u8 Default: 0 Range: 0 - 7 |
||||||
| Ipv4NlriPrefix |
The Prefix field contains an IPv4 address prefix followed by enough trailing bits to make the end of the field fall on an octet boundary. Note that the value of trailing bits is irrelevant. Type: ip Default: 192.85.1.1 |
||||||
| Ipv4PrefixLength |
The Length field for IPv4 routes indicates the length, in bits, of the address prefix. A length of zero indicates a prefix that matches all(as specified by the address family) addresses (with prefix, itself,of zero octets). Type: u8 Default: 24 |
||||||
| Label |
This field is applicable when Safi is Labeled IP or VPN. It is a 20 bit value. Type: u32 Default: 16 Range: 0 - 1048575 |
||||||
| MdtGroupAddress |
MDT Group Address Type: ip Default: 0.0.0.0 |
||||||
| MdtIpv4Address |
MDT IPv4 Address Type: ip Default: 0.0.0.0 |
||||||
| NlriPrefix |
The Prefix field contains an IPv6 address prefix followed by enough trailing bits to make the end of the field fall on an octet boundary. Note that the value of trailing bits is irrelevant. Type: ipv6 Default: 2000::1 |
||||||
| PrefixLength |
The Length field for IPv6 routes indicates the length, in bits, of the address prefix. A length of zero indicates a prefix that matches all (as specified by the address family) addresses (with prefix, itself,of zero octets). Type: u8 Default: 64 |
||||||
| RouteDistinguisher |
This field is applicable when Safi is Labeled IP or VPN. It is a 8 byte value. Type: string Default: 0x00:100:1 |
There are no read-only attributes.