BgpMpReachUnReachAttr Object

HOME | TECHNOLOGIES | TEST CONFIGURATION | SEQUENCER COMMANDS | GUI COMMAND NAMES | ALL COMMANDS | RESULT | PDU | ALL | OBJECT TREE

Description:

MP reach/Mp Unreach Attribute

Children: BgpMpNlri

Automatically created from: BgpCustomAttribute

BgpMpReachUnReachAttr Writable Attributes

Attribute Description
Common Writable Attributes Active, Name
Afi

AFI for Mp reach/Mp Unreach between 1 to 65535. This field carries the identity of the Network Layer protocol associated with the Network Address that follows

Type: u16

Default: 2

Range: 1 - 65535
CustomSubAfi

Sub AFI as Custom, which takes any one byte value.

Type: u8

Default: 0
MpReachIpv4NextHops

A variable-length field that contains the IPv4 Network Address of the next router on the path to the destination system. The Network Layer protocol associated with the Network Address of the Next Hop is identified by a combination of AFI, SAFI carried in the attribute.

Type: ip

Default: 192.85.1.1
MpReachIpv6NextHops

A variable-length field that contains the IPV6 Network Address of the next router on the path to the destination system. The Network Layer protocol associated with the Network Address of the Next Hop is identified by a combination of AFI, SAFI carried in the attribute.

Type: ipv6

Default: 2000::1
NextHopRouteDistinguisher

Route Distinguisher for Next Hop when Safi is VPN

Type: string

Default: 0x00:0:0
NlriValue

Network Layer Reachability Information Value. A variable length field that lists NLRI for the feasible routes that are being advertised in this attribute. The semantics of NLRI is identified by a combination of AFI, SAFI carried in the attribute.

Type: u8

Default: 0
SubAfi

Sub AFI for Mp reach/Mp Unreach. This field provides additional information about the type of the Network Layer Reachability Information carried in the attribute

Type: enum

Default: UNICAST

Possible Values:

Value Description
CUSTOM

Sub AFI as Custom, which takes any one byte value.
UNICAST

Sub AFI as Unicast

MULTICAST

Sub AFI as Multicast

UNICAST_AND_MULTICAST

Sub AFI as Unicast and Multicast

LABELED_IP

LABELED_IP Sub AFI

MDT

Sub Afi as MDT, this editor is supported only for IPv4 routes. For Ipv6 routes, complete hex value has to be entered when MDT is selected.
VPN

VPN Sub AFI

SubNetPointAttachment

A 1 octet field that MUST be set to 0, and SHOULD be ignored upon receipt.

Type: u8

Default: 0

BgpMpReachUnReachAttr Read-Only Attributes

There are no read-only attributes.