Description:
MLD port results.
Parents: MldPortConfig
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
Use this to connect a results object to an object. |
There are no writable attributes.
Read-Only Attribute | Description |
---|---|
RxFrameCount |
Total number of MLD frames received. Type: u32 Default: 0 |
RxGeneralQueryCount |
Total number of multicast general queries received. Type: u32 Default: 0 |
RxGroupAndSourceSpecificQueryCount |
Group- and source-specific queries are sent by a multicast router whenever a host leave a specific source of a group. This is to make sure that there are no other hosts of that source and group. Type: u32 Default: 0 |
RxGroupSpecificQueryCount |
Group-Specific Query is used to learn if a particular group has any members on an attached network. Type: u32 Default: 0 |
RxMldCheckSumErrorCount |
Total number of MLD messages received with checksum errors. Type: u32 Default: 0 |
RxMldLengthErrorCount |
Total number of MLD messages received with length errors. Type: u32 Default: 0 |
RxUnknownTypeCount |
Total number of MLD frames of unknown type received. Type: u32 Default: 0 |
RxV1QueryCount |
Total number of MLDv1 queries received. Routers use Multicast Listener Query messages to query a subnet for multicast listeners. Type: u32 Default: 0 |
RxV1ReportCount |
MLDv1 reports are sent to multicast routers to indicate that hosts have listeners interested in joining multicast groups whose multicast address is listed in the router's list. Type: u32 Default: 0 |
RxV2QueryCount |
Total number of MLDv2 queries received. Routers use Multicast Listener Query messages to query a subnet for multicast listeners. Type: u32 Default: 0 |
RxV2ReportCount |
MLDv1 are used to report interest in receiving multicast traffic for a specific multicast address or to respond to a Multicast Listener Query message. Type: u32 Default: 0 |
Timestamp |
Timestamp in seconds of last statistic update. Type: double Default: 0 |
TxFrameCount |
Total number of MLD frames transmitted. Type: u32 Default: 0 |
TxGeneralQueryCount |
General Queries are used to learn which multicast addresses have listeners on an attached link. Type: u32 Default: 0 |
TxGroupAndSourceSpecificQueryCount |
Group- and source-specific queries are sent by a multicast router whenever a host leave a specific source of a group. This is to make sure that there are no other hosts of that source and group. Type: u32 Default: 0 |
TxGroupSpecificQueryCount |
Total number of MLD group specific queries transmitted. The Group-Specific Query is used to learn if a particular group has any members on an attached network. Type: u32 Default: 0 |
TxStopListenGroupCount |
Stop listening events occur when the node stops listening to an address on the interface. Type: u32 Default: 0 |
TxV1QueryCount |
MLDv1 Membership Queries are sent by IP multicast routers to query the multicast reception state of neighboring interfaces. Type: u32 Default: 0 |
TxV1ReportCount |
MLDv1 reports are sent to multicast routers to indicate that hosts have listeners interested in joining multicast groups whose multicast address is listed in the router's list. Type: u32 Default: 0 |
TxV2AllowNewSourcesCount |
A Source-List-Change Record (SLCR) indicating the group's associated sources have changed such that data from a new set of sources are to be received. Type: u32 Default: 0 |
TxV2BlockOldSourcesCount |
A Source-List-Change Record (SLCR) indicating the group's associated sources have changed such that data from an existing set of sources are not required. Type: u32 Default: 0 |
TxV2ChangeToExcludeModeCount |
A Filter-Mode-Change Record (FMCR) indicating the filter-mode of the reception state has changed to exclude mode. Type: u32 Default: 0 |
TxV2ChangeToIncludeModeCount |
A Filter-Mode-Change Record (FMCR) indicating the filter-mode of the reception state has changed to include mode. Type: u32 Default: 0 |
TxV2ModeIsExcludeCount |
A Current-State Record (CSR) indicating the current reception state with respect to 1 multicast group at a given interface. The state contains the exclude filter mode. Type: u32 Default: 0 |
TxV2ModeIsIncludeCount |
A Current-State Record (CSR) indicating the current reception state with respect to 1 multicast group at a given interface. The state contains the include filter mode. Type: u32 Default: 0 |
TxV2QueryCount |
MLDv2 Membership Queries are sent by IP multicast routers to query the multicast reception state of neighboring interfaces. Type: u32 Default: 0 |
TxV2ReportCount |
MLDv2 reports are sent to multicast routers to indicate that hosts have listeners interested in joining multicast groups whose multicast address is listed in the router's list. Type: u32 Default: 0 |