Description:
PPPoE client block results.
Parents: PppoeClientBlockConfig
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
PppoaClientBlockConfig, PppoaServerBlockConfig, PppoeClientBlockConfig, PppoeClientBlockConfig, PppoeServerBlockConfig, PppoL2tpv2ClientBlockConfig, PppoL2tpv2ServerBlockConfig, PppoL2tpv3ClientBlockConfig, PppoL2tpv3ServerBlockConfig, PppProtocolConfig |
Use this to connect a results object to an object. |
There are no writable attributes.
Read-Only Attribute | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AttemptedCount |
Number of attempted session connects incremented the first time an LCP Configure-Request packet is sent per session. Type: u32 Default: 0 |
||||||||||||||
AvgSetupTime |
Sum of the setup time for each connected session divided by the number of connected sessions. Setup time is calculated as the number of milliseconds between the first PADI message and when the session state is UP. IPv4 Session UP: IPCP is negotiated. IPv6 Session UP: RS/RA is exchanged. Type: u32 Default: 0 |
||||||||||||||
AvgSuccessTransactionCount |
Average number of successful transactions taken to connect sessions. Type: u32 Default: 0 |
||||||||||||||
ConnectedSuccessCount |
Number of sessions connected successfully. Type: u32 Default: 0 |
||||||||||||||
DisconnectedSuccessCount |
Number of disconnected sessions during which an LCP Terminate-Request packet was sent (from either peer) and an LCP Terminate-Ack packet was received. Type: u32 Default: 0 |
||||||||||||||
FailedConnectCount |
Number of connect failures (Attempted value - Connected Successfully value). Type: u32 Default: 0 |
||||||||||||||
FailedDisconnectCount |
Number of disconnected sessions during which an LCP Terminate-Request packet was sent but an LCP Terminate-Ack packet was not received (does not apply to invalid LCP Terminate-Request packets). Type: u32 Default: 0 |
||||||||||||||
Ipv4CpState |
IPv4 CP state. Type: enum Default: NONE Possible Values:
|
||||||||||||||
Ipv6CpState |
IPv6 CP state. Type: enum Default: NONE Possible Values:
|
||||||||||||||
MaxSetupTime |
Longest period of time (in milliseconds) from when the first LCP Configure-Request packet was sent out to when an IPCP Configure-Ack packet was received for a single session. Type: u32 Default: 0 |
||||||||||||||
MinSetupTime |
Shortest period of time (in milliseconds) from when the first LCP Configure-Request packet was sent out to when an IPCP Configure-Ack packet was received for a single session. Type: u32 Default: 0 |
||||||||||||||
RetryCount |
Number of times the failed sessions were retried. Type: u32 Default: 0 |
||||||||||||||
RxChapCount |
Number of CHAP packets received. Type: u32 Default: 0 |
||||||||||||||
RxIpcpCount |
Number of IPCP packets received. Type: u32 Default: 0 |
||||||||||||||
RxIpv6cpCount |
Number of IPv6CP packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigAckCount |
Number of LCP configure ack packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigNakCount |
Number of LCP configure nak packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigRejectCount |
Number of LCP configure reject packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigRequestCount |
Number of LCP configure request packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpEchoReplyCount |
Number of LCP echo reply packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpEchoRequestCount |
Number of LCP echo request packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpIdentificationCount |
Rx LCP Identification Count Type: u32 Default: 0 |
||||||||||||||
RxLcpTermAckCount |
Number of LCP terminate ack packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpTermRequestCount |
Number of LCP terminate request packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadoCount |
Number of PADO packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadsCount |
Number of PADS packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadtCount |
Number of PADT packets received. Type: u32 Default: 0 |
||||||||||||||
RxPapCount |
Number of PAP packets received. Type: u32 Default: 0 |
||||||||||||||
RxRaCount |
Number of Router Advertisement Count messages received. Type: u32 Default: 0 |
||||||||||||||
Sessions |
Number of sessions configured. Type: u32 Default: 0 |
||||||||||||||
SessionsUp |
Number of configured sessions in connected state. Type: u32 Default: 0 |
||||||||||||||
State |
Summary of the state of the PPPoX sessions contained in the block. Type: enum Default: IDLE Possible Values:
|
||||||||||||||
SuccSetupRate |
Session successful setup rate (sessions/sec). Type: u32 Default: 0 |
||||||||||||||
TxChapCount |
Number of CHAP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxIpcpCount |
Number of IPCP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxIpv6cpCount |
Number of IPv6CP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigAckCount |
Number of LCP configure ack packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigNakCount |
Number of LCP configure nak packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigRejectCount |
Number of LCP configure reject packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigRequestCount |
Number of LCP configure request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpEchoReplyCount |
Number of LCP echo reply packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpEchoRequestCount |
Number of LCP echo request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpTermAckCount |
Number of LCP terminate ack packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpTermRequestCount |
Number of LCP terminate request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadiCount |
Number of PADI packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadrCount |
Number of PADR packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadtCount |
Number of PADT packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPapCount |
Number of PAP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxRsCount |
Number of Router Solicitation Count messages sent. Type: u32 Default: 0 |