Description:
PPPoE server block results object.
Parents: PppoeServerBlockConfig
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
ResultParent (ResultChild) |
PppoaClientBlockConfig, PppoaServerBlockConfig, PppoeClientBlockConfig, PppoeServerBlockConfig, PppoeServerBlockConfig, PppoL2tpv2ClientBlockConfig, PppoL2tpv2ServerBlockConfig, PppoL2tpv3ClientBlockConfig, PppoL2tpv3ServerBlockConfig, PppProtocolConfig |
Use this to connect a results object to an object. |
There are no writable attributes.
Read-Only Attribute | Description | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AvgSetupTime |
Average period of time (in milliseconds) from when the first LCP Configure-Request packet was sent out to when an IPCP Configure-Ack packet was received for a single session. Type: u32 Default: 0 |
||||||||||||||
AvgSuccessTransactionCount |
Average number of successful transactions needed to connect a session. Type: u32 Default: 0 |
||||||||||||||
ConnectedSuccessCount |
Number of sessions connected successfully. Type: u32 Default: 0 |
||||||||||||||
DisconnectedSuccessCount |
Number of disconnected sessions during which an LCP Terminate-Request packet was sent (from either peer) and an LCP Terminate-Ack packet was received. Type: u32 Default: 0 |
||||||||||||||
FailedConnectCount |
Attempted value - Connected Successfully value. Type: u32 Default: 0 |
||||||||||||||
FailedDisconnectCount |
Number of disconnected sessions during which an LCP Terminate-Request packet was sent but an LCP Terminate-Ack packet was not received (does not apply to invalid LCP Terminate-Request packets). Type: u32 Default: 0 |
||||||||||||||
Ipv4CpState |
IPv4 CP state. Type: enum Default: NONE Possible Values:
|
||||||||||||||
Ipv6CpState |
IPv6 CP state. Type: enum Default: NONE Possible Values:
|
||||||||||||||
MaxSetupTime |
Longest period of time (in milliseconds) from when the first LCP Configure-Request packet was sent out to when an IPCP Configure-Ack packet was received for a single session. Type: u32 Default: 0 |
||||||||||||||
MinSetupTime |
Shortest period of time (in milliseconds) from when the first LCP Configure-Request packet was sent out to when an IPCP Configure-Ack packet was received for a single session. Type: u32 Default: 0 |
||||||||||||||
RxChapCount |
Number of CHAP packets received. Type: u32 Default: 0 |
||||||||||||||
RxIpcpCount |
Number of IPCP packets received. Type: u32 Default: 0 |
||||||||||||||
RxIpv6cpCount |
Number of IPv6CP packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigAckCount |
Number of LCP configure ack packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigNakCount |
Number of LCP configure nak packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigRejectCount |
Number of LCP configure reject packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpConfigRequestCount |
Number of LCP configure request packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpEchoReplyCount |
Number of LCP echo reply packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpEchoRequestCount |
Number of LCP echo request packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpIdentificationCount |
Rx LCP Identification Count Type: u32 Default: 0 |
||||||||||||||
RxLcpTermAckCount |
Number of LCP terminate ack packets received. Type: u32 Default: 0 |
||||||||||||||
RxLcpTermRequestCount |
Number of LCP terminate request packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadiCount |
Number of PADI packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadrCount |
Number of PADR packets received. Type: u32 Default: 0 |
||||||||||||||
RxPadtCount |
Number of PADT packets received. Type: u32 Default: 0 |
||||||||||||||
RxPapCount |
Number of PAP packets received. Type: u32 Default: 0 |
||||||||||||||
RxRsCount |
Number of Router Solicitation messages received. Type: u32 Default: 0 |
||||||||||||||
Sessions |
Number of configured sessions. Type: u32 Default: 0 |
||||||||||||||
SessionsUp |
Number of configured sessions in connected state. Type: u32 Default: 0 |
||||||||||||||
State |
Summary of the state of the PPPoX sessions contained in the block. Type: enum Default: IDLE Possible Values:
|
||||||||||||||
SuccSetupRate |
Session successful setup rate (sessions/sec). Type: u32 Default: 0 |
||||||||||||||
TxChapCount |
Number of CHAP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxIpcpCount |
Number of IPCP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxIpv6cpCount |
Number of IPv6CP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigAckCount |
Number of LCP configure ack packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigNakCount |
Number of LCP configure nak packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigRejectCount |
Number of LCP configure reject packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpConfigRequestCount |
Number of LCP configure request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpEchoReplyCount |
Number of LCP echo reply packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpEchoRequestCount |
Number of LCP echo request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpTermAckCount |
Number of LCP terminate ack packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxLcpTermRequestCount |
Number of LCP terminate request packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadoCount |
Number of PADO packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadsCount |
Number of PADS packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPadtCount |
Number of PADT packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxPapCount |
Number of PAP packets transmitted. Type: u32 Default: 0 |
||||||||||||||
TxRaCount |
Number of Router Advertisement messages sent. Type: u32 Default: 0 |