Description:
Set up RFC 2889 errored frames filtering test.
Can be used with Command Sequencer: No
Parents: Sequencer
Relations:
Side name (Type) |
Relative | Description |
---|---|---|
TestCaseConfig (BenchmarkingTestCaseConfig) |
DcbTestConfig, Rfc2544BackToBackFramesConfig, Rfc2544FrameLossConfig, Rfc2544LatencyConfig, Rfc2544ThroughputConfig, Rfc2544TrafficGroupConfig, Rfc2889AddrCachingCapacityConfig, Rfc2889AddrLearningRateConfig, Rfc2889BroadcastFrameForwardingConfig, Rfc2889BroadcastFrameLatencyConfig, Rfc2889CongestionControlConfig, Rfc2889ErroredFramesFilteringConfig, Rfc2889ForwardingConfig, Rfc2889ForwardPressureConfig, Rfc2889MaxForwardingRateConfig, Rfc3918Config, Rfc5180Config |
Benchmarking test case config used to set up test command. |
SequencerRootCommand (BenchmarkingTestCaseRootCommand) |
Parent command. |
Attribute | Description | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
BurstSize |
Burst size. Type: u32 Default: 1 Range: 1 - 4294967295 |
||||||||||||
Crc |
CRC size. Type: u16 Default: 64 Range: 64 - 10000 |
||||||||||||
DstDeviceList |
Destination device list. Type: handle Default: 0 |
||||||||||||
Duration |
Transmission time in seconds. Type: double Default: 60 Range: 1 - 16777215 |
||||||||||||
DurationMode |
Duration mode for each transmitted stream. Whether to measure test duration in seconds or number of frames. Type: enum Default: SECONDS Possible Values:
|
||||||||||||
EnableCrc |
Whether to enable or disable CRC. Type: bool Default: TRUE Possible Values:
|
||||||||||||
EnableOversize |
Whether to enable or disable oversized frames filtering. Type: bool Default: TRUE Possible Values:
|
||||||||||||
EnableUndersize |
Whether to enable or disable undersized frames filtering. Type: bool Default: TRUE Possible Values:
|
||||||||||||
LatencyType |
How latency results are calculated and displayed. Type: enum Default: LILO Possible Values:
|
||||||||||||
LearningFreqMode |
Learning frequency. Type: enum Default: LEARN_ONCE Possible Values:
|
||||||||||||
LoadList |
List of user defined load values. Type: double Default: 0 Range: 0.000001 - 100000.0 |
||||||||||||
LoadUnits |
Unit of measurement for the load parameter, applied to all ports and streams in the test. Type: enum Default: PERCENT_LINE_RATE Possible Values:
|
||||||||||||
MaxLegalFrameSize |
Length threshold of the jumbo frame counter. Size includes CRC. Type: s16 Default: 1518 |
||||||||||||
NumOfTrials |
Number of trials. Type: u16 Default: 1 Range: 1 - 60 |
||||||||||||
Oversize |
Oversized frame size. Type: u16 Default: 1523 Range: 1519 - 16383 |
||||||||||||
SrcDeviceList |
Source device list. Type: handle Default: 0 |
||||||||||||
TrafficPattern |
Traffic pattern type. Type: enum Default: MESH Possible Values:
|
||||||||||||
TrafficVerificationAbortOnFail |
Test behavior when traffic verification fails. Type: bool Default: TRUE Possible Values:
|
||||||||||||
TrafficVerificationFreqMode |
Specifies when to perform traffic verification during the test. Type: enum Default: NONE Possible Values:
|
||||||||||||
TrafficVerificationTxFrameCount |
Number of frames to use for traffic verification. Type: u32 Default: 100 Range: 1 - 32767 |
||||||||||||
TrafficVerificationTxFrameRate |
Number of frames to use for traffic verification. Type: u32 Default: 1000 Range: 1 - 14880952 |
||||||||||||
Undersize |
Undersized frame size. Type: u8 Default: 63 Range: 40 - 63 |
There are no read-only attributes.